Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)
 
 
 
 
 
  BRAKE PRODUCTS
78,328 part numbers: Brake Wheels & Discontinued Brake Parts
  GEMCO
14,216 part numbers: Motion Control Products
 
  GLEASON
23,578 part numbers: Cable & Hose Management Systems
  AERO-MOTIVE
3,742 part numbers: Cable & Hose Management Systems
  CUTLER-HAMMER
6,313 part numbers: Electrical Control Products
 
 
 
 
 
  STEARNS
6,602 part numbers: Motor Mounted Brakes
  HUBBELL
16,260 part numbers: Electrical Control Products
  SUPERBOLT
110 part numbers: Fastening Solutions
  TELEMOTIVE
2,458 part numbers: Radio Remote Control
  RENOLD
399 part numbers: Mechanical Power Transmission Products
 
 

Aero-Motive Direct
Amazon Store

 
84 part numbers
 

Brake Products
Amazon Store

 
515 part numbers
 
 
Brake Products is now an authorized distributor of

 
 
Web: www.BrakeProducts.com Email: sales@BrakeProducts.com Phone: (888) 861-8777
 
Complete Price List
 
Brake Products   |  Cutler-Hammer   |  Eldro   |  Renold Ajax   |  Reuland   |  Scan-Pac   |  Superbolt   |  Wagner   |  Westinghouse
 
Westinghouse  
No. Part Number Description Image Price Stock Qty
1 WES-135F Westinghouse Brake. Old Obsolete Westinghouse Brake 525 FT LBS - Call C/F
2 WES-167F Westinghouse Brake. Old Obsolete Westinghouse Brake - Call C/F
3 WES-2247C09H03 Westinghouse Lever. Brake Lever For a CB-75 & CB-110 Brake 7 Inch Item 9, 1 per brake SEE E007058 - Call C/F
4 WES-2247C0H80H Westinghouse Lever. Brake Lever For a CB-75 & CB-110 Brake 7 Inch Item 9, 1 per brake SEE E007054 - Call C/F
5 WES-24D5096H11 Westinghouse Spring. Wheel End Spring on a TM 19, 23 or 30 Inch Brake Tie Rod. Ref No. 10 1 per Brake Recommended Spare Part, E023027 (3LBS) - 30.00 C/F
6 WES-26B766H01 Westinghouse Brake Wheel 16 Inch Part WES-26B766H01 aka BPI-BE161003 With a Finished Bore & Keyway For 610 810 & AC18 Motors D = 16.00 Inch Diameter F = 6.75 Inch Face Width O = 6.50 Inch Offset face centerline to hub edge 3.125 Inch Offset face edge to hub edge This is the AIST Standard Offset H = 4.50 Inch Hub Length B = 3.25 Inch Hub Bore 1.25 Inch Taper / Foot 0.75 X 0.25 Keyway 9.875 Inch Overall Width Motor Freight Only (140LBS) H 10" L 16" W 16" on a skid - 1740.00 C/F
7 WES-27D7221H04 Westinghouse Bolt. Brake Shoe Bolt for a TM43 or TM63 Brake, E004070 Ref # 15, 2 per brake (1LB) - 113.00 C/F
8 WES-318B777H08 Westinghouse Wheel End Spring Seat on a TM-3014 Brake Assembly. Item # 11. 1 per brake E030036 8/8 - 251.00 C/F
9 WES-318B788H07 Westinghouse Block. Hinge Block, Magnet End on a TM-2311 Brake. E0023033 OBSOLETE see E023062. Item # 1 - 572.00 C/F
10 WES-318B789H07 Westinghouse Pin. Pivot Pin for a TM2311 Electric Brake, 4 per Brake, E023034 1/9 - 463.00 C/F
11 WES-318B793H06 Westinghouse Adjusting Screw for a TM1985 & TM2311 Brake Assembly. Page Ref. # 8. 1 Per Brake. E019040 8/1 - 259.00 C/F
12 WES-319B098G01 Westinghouse Clapper For a TM-2311 Brake Assembly SEE AME-E023040 Item 25, 1 per brake - 3055.00 C/F
13 WES-31D4114H20 Westinghouse Bushing on the Shoe Clapper Arm for a TM-1985 or TM-2311 Brake, 2 per brake E019028 6/6 (<1LB) - 28.00 C/F
14 WES-31D4118H20 Westinghouse Bushing on a TM3014 Brake, 14 per brake, E030045 8/8 - 37.00 C/F
15 WES-3208B04G07 Coil, Brake Coil for a Gemco / Westinghouse CB-35 Brake 460 Volt AC aka E005039 - Call C/F
16 WES-3279B97H01 Westinghouse Solenoid Assembly For a 4.5 Inch CB-15 Brake Includes Plunger & Solenoid Guides aka E004109 - 182.00 C/F
17 WES-3279B97H03 Westinghouse Solenoid Assembly For a CB-75 7 Inch Diameter Brake Includes the Plunger & Solenoid Guides Coils ordered separately Item 4, 1 per brake aka E007079 (7LBS) H 4.00" L 4.00" W 4.00 - 549.00 C/F
18 WES-3280B04G03 Westinghouse Coil for a CB-15 Brake. 460 Volt 60 Hz. Single Phase, 4.5 Inch, E004102 (1LB) - 165.00 C/F
19 WES-3280B04G11 Westinghouse Coil 460 Volt 7 Inch For a CB-75 Brake 460 Volt AC, 60 Hz Item 2, 1 per brake aka E007065 (2LBS) H 4" L 4" W 4" Box - 484.00 C/F
20 WES-3280B04G15 Westinghouse Coil for a CB-110 or CB-160 Brake Assembly. 460 Volt AC, 60 Hz E007066 (3LBS) - 403.00 C/F
21 WES-423A298602 Westinghouse Resistor. External Resistor for a TM-1035 Shunt Brake Assembly E010049 3/7 - 325.00 C/F
22 WES-423A298G02 Westinghouse Resistor. External resistor for a TM-1035 Brake Assembly E010044 - 325.00 C/F
23 WES-423A298G05 Westinghouse Resistor 423A298G05 TM-2311 37 OHMS Continuous, 27 OHMS Intermittent see E023022 1/14 - 600.00 C/F
24 WES-426C041G01 Westinghouse Lining Part WES-426C041G01 Brake Lining Kit For a 30 Inch TM-3014 DC Brake Kit includes 2 Drilled Linings & Rivets aka E030054 Dated 1/18 - 1442.00 C/F
25 WES-438411H01 Westinghouse Spring. Tension Spring on a TM43 Brake Assembly. 2 Per brake, sold each. Item ref # 28 Recommended Spare Part E004080 - 32.03 C/F
26 WES-438A069H05 Westinghouse Spring. Tension Spring for a 19 or 23 Inch TM Brake, E023044, Item # 28, 2 per brake, sold each, recommended spare part - 61.00 C/F
27 WES-438A070H09 Westinghouse Spring. Wheel End Spring on a TM1355 Brake Tie Rod. Ref No. 10 1 per Brake Recommended Spare Part E013041 (2LBS) - 30.00 C/F
28 WES-438A072H03 Westinghouse Spring. Main Spring on a TM2311 Brake Assembly. Item 3. 438A072H03, 1 per brake. Recommended spare part 1/9 - Call C/F
29 WES-438A072H05 Westinghouse Spring. Main Spring on a TM1985 Brake Assembly, Item Ref # 3, 1 per brake, recommended spare part E019044 10/8 - Call C/F
30 WES-438A072H13 Ametek Gemco Main Spring on a TM83 Brake Assembly, Ref. # 8, 1 per brake, a recommended spare part, E008039 - Call C/F
31 WES-438A072H15 Westinghouse Spring. Main Spring on a TM-43 Brake Assembly, Item 4, 1 per brake E004079 - 73.00 C/F
32 WES-438A411H05 Westinghouse Spring. Tension Spring on a TM1355 & TM1665 Brake, Item # 25, 2 per brake, recommended spare part (1LB) - 38.50 C/F
33 WES-438A411H08 Westinghouse Tension Spring for a TM3014 30 Inch Brake. Ref. # 28. 2 per brake. Recommended spare part. E030052 1/8 - 404.00 C/F
34 WES-438A429H01 Westinghouse Adjusting Screw Block for a TM2311 Brake Assembly, 1 per Brake, E023046 1/9 - 710.00 C/F
35 WES-439C192G06 Westinghouse Arm. Inner Brake Shoe Arm on a TM-1355 Brake Assembly. Ref. #21. 1 per brake. Item # 21, 1 per brake, E013067 - 657.00 C/F
36 WES-439C201G01 Westinghouse Brake Shoe & Lining For a TM1355 or ET13 13 Inch Diameter Electric Brake Item 14 Qty. 1, 2 per brake but sold each Bonded, Premium Non-Asbestos Lining Material aka E013025 (12LBS) H 8.00" L 12.00" W 8.00" - 669.00 2
37 WES-439C314G01 Westinghouse / Gemco Brake Part TM-83 439C314G01 Brake Shoe & Lining Assembly For an 8 Inch TM-83 or ET-8 Brake Item 14, 2 per brake, sold each Premium Bonded, Non-Asbestos Material aka E008025 Dated 1/18 (3LBS) H 4" L 8" W 4" Box - 632.00 C/F
38 WES-439C324G01 Westinghouse Gemco Clapper & Arm For an 8 Inch TM-83 Brake Assembly 1 per brake aka E008061 - 1330.00 C/F
39 WES-439C394G01 Westinghouse Brake Shoe & Lining Complete for a TM-1985 or ET-19, 19 Inch Diameter Electric Brake Assembly, Qty. 1, 2 per Brake, Ref. # 14, Bonded, Non-Asbestos Material E019024 (45LBS) 1/8 - 1575.00 C/F
40 WES-439C397G01 Westinghouse Clapper. Inner Clapper & Arm for a TM 1985 Brake, 1 Per brake, Ref Item # 22, E019059 - Call C/F
41 WES-450A849H01 Westinghouse Adjusting Screw Block on a TM-3014 Brake. Ref # 7 1 per brake, E030034 8/8 - 803.00 C/F
42 WES-450A869G01 Westinghouse Bolt, Hardened Brake Shoe Bolt Assembly for a TM-3014 30 Inch Brake. Includes the Hex Nut. Ref. # 16, 2 per brake but sold individually, E030040 1/11 - 549.00 C/F
43 WES-489C202G01 Westinghouse Clapper & Arm for a TM1355 Brake. Inner Coil Arm. 1 per brake. Ref # 22. E013068 - 1609.00 C/F
44 WES-573570 Westinghouse Brake Shoe Assembly Part 573570 OBSOLETE from Westinghouse Brake Shoe & Lining Assembly For a 10 Inch Westinghouse DI Brake Assembly See 102048 Ships in 45 days Dated 4/18 - 264.80 C/F
45 WES-635C104G04 Westinghouse Tie Rod on a TM11355 13 Inch Brake Assembly. Ref # 6. 1 per brake E013052 - Call C/F
46 WES-635C104G05 Westinghouse Tie Rod on a TM1665 16 Inch Brake Assembly. Ref # 6. 1 per brake E016200 - 479.40 C/F
47 WES-635C104G06 Westinghouse Tie Rod on a TM1985 19 Inch Brake Assembly. Ref # 6. 1 per brake E019057 - Call C/F
48 WES-635C236G01 Westinghouse Clapper & Arm on a TM-1665 Brake Assembly. Ref. #22. 1 per brake, E0016052 - 2165.00 C/F
49 WES-635C256G17 Westinghouse Coil Part 635C256G17 aka E019025 Shunt Wound Brake Coil For a 19 Inch TM-1985 DC Brake Item 26, 2 Coils per Brake, sold each 32 Volts per coil continuous duty 40 Volts per coil intermittent duty Average Resistance 8.5 OHMS Coils are connected in series Dated 1/18 - 9914.00 C/F
50 WES-635C292G01 Westinghouse Brake Shoe Assembly For a TM-1035 or ET-10, 10 Inch Diameter Electric Brake Part WES-635C292G01 Item 14 2 per brake, sold each Premium OEM Non-Asbestos Bonded Lining Material aka E010047 (5LBS) H 4" L 10" W 4" Box - 677.00 2
51 WES-635C316G01 Westinghouse Brake Shoe & Lining Complete for a TM-2311, 23 Inch Diameter Electric Brake Assembly, Qty. 1, 2 per Brake, Ref. # 14, Bonded, Non-Asbestos Material E023025 1/10 - 2393.00 C/F
52 WES-635C328G16 Westinghouse Coil TM-1035 Shunt Wound Shunt Wound Coil For a TM-1035 DC Brake TM = Twin Magnet / Coils Brake Item 26 2 Coils per brake, sold each 32 Volts per coil continuous duty 40 Volts per coil intermittent duty Average resistance 24 Ohms Coils are connected in series aka E010049 (30LBS) 1/16 - 2617.00 C/F
53 WES-635C328G19 Westinghouse Coil SEE NEW PART E010110 Series Wound Coil For a 10 Inch TM-1035 Brake TM = Twin Magnet / Coils Brake Item 26, 2 per brake but sold each Has been used with 603 & 803 Mill Motors (30LBS) - 2722.00 C/F
54 WES-635-C328G19 Coil SEE NEW PART E010110 Series Wound Brake Coil For a 10 Inch TM-1035 Brake DC brake aka 635C328G19 1/16 - 2722.00 C/F
55 WES-635C384G16 Westinghouse Gemco Coil Part WES-635C384G16 Shunt Wound Brake Coil For a 13 Inch TM-1355 DC Brake TM = Twin Magnet / Coils Brake Item 26, 2 per brake, sold each 32 Volts per coil continuous duty 40 Volts per coil intermittent duty Average Resistance per coil 19 Ohms Coils are connected in series aka AME-E013026 (49LBS) - 4107.00 C/F
56 WES-637C316G01 Westinghouse Brake Shoe & Lining Complete for a TM-2311, 23 Inch Diameter Electric Brake Assembly, Qty. 1, 2 per Brake, Ref. # 14, Bonded, Non-Asbestos Material E023025 1/15 - 2393.00 C/F
57 WES-637C373G16 Westinghouse Coil for a TM-2311 Brake Assembly. Shunt Wound. 2 Coils are required for this brake. 32 Volts per coil continuous duty, 40 Volts per coil intermittent duty, average resistance 6.1 OHMS. Cost per coil, brake requires 2 coils connected in series. Ref # 26, E023026 (150LBS) 1/15 - 12002.00 C/F
58 WES-637C384G16 Westinghouse Gemco Coil Part WES-637C384G16 Shunt Wound Brake Coil For a 13 Inch TM-1355 DC Brake TM = Twin Magnet / Coils Brake Item 26, 2 per brake, sold each 32 Volts per coil continuous duty 40 Volts per coil intermittent duty Average Resistance per coil 19 Ohms Coils are connected in series aka AME-E013026 (49LBS) - 4107.00 C/F
59 WES-637C502G16 Westinghouse Brake Part TM-2311 Series Wound Brake Coil For a 23 Inch TM-2311 DC Brake Has been used with 616 & 814 Mill Motors 0.0049 OHMS per coil average 265 AMPS 1 Hour 360 AMPS 1/2 Hour 2 coils per brake, sold each Part WES-637C502G16 aka E023054 (150LBS) - 12002.00 C/F
60 WES-637C504G16 Westinghouse Coil For a TM-83 DC Brake Shunt Coil 32 Volts per coil continuous duty 40 Volts per coil intermittent duty Average Resistance 31 Ohms 2 per brake sold each Cost is per coil Requires 2 coils connected in series Item 26 E008026 - 2205.90 C/F
61 WES-637C504G23 Westinghouse Coil For a TM-83 DC Brake Series Wound Coil Coil Amperes 1 Hour 4.1 AMPS Coil Amperes 1/2 Hour 5.5 AMPS Average Resistance 3.13 OHMS E008056 - 1936.00 C/F
62 WES-637C504G25 Westinhouse Coil For a TM-83 DC Brake 8 Inch Series Wound For a TM-83 DC Brake 8 Inch Series Wound Brake Coils 19 AMPS Ea ½ Hr 14 AMPS Ea 1 Hr 0.601 OHMS AVG per coil aka E008086 - 2266.00 C/F
63 WES-637C523G16 Westinghouse Brake Part TM Part WES-637C523G16 Series Wound Brake Coil For a 19 Inch TM-1985 DC Brake 2 per brake, sold each aka 637C523G16 Used with 810 & 612 Mill Motors 0.124 Ohms Resistance Average Rated @ 180 Amps 1/2 Hour 137 Amps 1 Hour aka AME-E019062 Dated 1/17 (150LBS) Motor Freight Only - 9914.00 C/F
64 WES-637C530G16 Westinghouse Coil. 16 Inch Series Coil, Special Series Coil for a TM16 Brake, 2 per brake, sold each, E016054, 808 / 610 Mill Motors, 0.0195 Ohms Resistance Average, 90 Volts Intermittent, 1 Hour / 125 Volts Continues Duty Cycle, 8 Hour. Specifications are for a single coil (100LBS) 1/11 - 4978.00 C/F
65 WES-637C551G16 Westinghouse Coil. Series Coil for a TM13 Brake, 2 per brake, sold each, 637C551G16, 608 Mill Motor, 0.0358 Ohms Resistance Average, 85 Amps 1/2 Hour, 63 Amps 1 Hour (60 LBS) 12/6 - 3244.00 C/F
66 WES-637C551G17 Westinghouse Coil. Series Coil for a TM13 Brake, 2 per brake, sold each, 637C551G16, 606 Mill Motor, Ohms Resistance Average, Amps 1/2 Hour, Amps 1 Hour (60 LBS) - 3244.00 C/F
67 WES-637C551G20 Westinghouse Coil. Series Coil for a TM13 Brake, 2 per brake, sold each, 637C551G20, 604 Mill Motor, 0.1551Ohms Resistance Average, 40 Amps 1/2 Hour, 30 Amps 1 Hour (60 LB) 1/14 - 3653.86 C/F
68 WES-637C551G25 Westinghouse Coil. Series Wound Coil for a TM-1355 Brake Assembly E013083 - Call C/F
69 WES-641C818G16 Westinghouse Coil. 30 Inch Shunt Wound Brake Coil for a TM-3014 Brake. Sold each, 2 per brake E030024 - 12673.00 C/F
70 WES-645C173G16 Westinghouse Coil. Shunt Wound Coil For a TM-63 Brake Assembly Intermittent Duty, 1 Hour Cycle 80 Volts DC / 1.35 AMPS Continuous Duty, 8 Hour Cycle 64 Volts DC / 1.08 AMPS Average Cold Coil Resistance 59.4 OHMS Item 26, 1 per brake aka E006026 Resistors are required in series E006024 / Forcing E006025 (18LBS) - 1357.00 C/F
71 WES-645C173G20 Ametek Gemco Coil. Series Wound Coil for a TM-63 Brake Assembly E006079 1/14 - 1085.00 C/F
72 WES-645C173G27 Westinghouse Coil. Series Wound Coil for a TM-63 Brake Assembly. E006079 1/14 - 1255.00 C/F
73 WES-645C540G01 Westinghouse Arm. Outer Clapper Arms on a TM-43 Brake. Ref # 25, 1 pair per brake, E004090 - 378.00 C/F
74 WES-645C544G01 Westinghouse Arm. Outer Brake Shoe Arm on a TM-43 Brake. Ref # 16, 1 per brake E004118 - 218.00 C/F
75 WES-645C544G02 Westinghouse Arm. Inner Brake Shoe Arms on a TM-43 Brake. Ref # 16, 1 pair per brake, E004119 - 302.00 C/F
76 WES-645C545G16 Westinghouse Brake Coil Part 645C545G16 aka E004051 Shunt Wound Coil For a 4.5 Inch TM-43 DC Brake Assembly Intermittent Duty, 1 Hour Cycle 80 Volts DC / 1.10 AMPS Continuous Duty, 8 Hour Cycle 64 Volts DC / 0.88 AMPS Average Cold Coil Resistance 73 OHMS Item 26, 1 Coil per brake Resistors are required In Series Part E004044 Forcing Part E004045 Stock to 5 Weeks Dated 1/18 (16LBS) - 1347.00 C/F
77 WES-645C545G26 Westinghouse Coil. Series coil for a TM-43 Brake Assembly E005154 (8LBS) - 1063.00 C/F
78 WES-816C691G16 Westinghouse Lining & Rivet Kit for a TM83 Electric Brake Assembly, 1 Pair, 8 Inch Diameter, E008057 - 55.00 C/F
79 WES-844303 Westinghouse Coil Types AI & DI Magnetic Brake Coil 440 Volt AC For Frames 43 & 63 15-342 - Call C/F
80 WES-861C691G17 Westinghouse Lining Kit Pair of drilled linings & fasteners For a TM-1035 DC Brake 10 Inch aka E010114 8 Drilled & Countersunk Holes Qty 18 Rivets (2LBS) H 6.00" L 4.00" W 4.00" - 157.00 C/F
81 WES-861C691G18 Westinghouse Lining Kit, pair of drilled & countersunk linings with fasteners for a TM1355, 13 Inch Diameter Brake. E013055 (3LBS) - 159.00 C/F
82 WES-861C691G19 Westinghouse Gemco Lining Kit TM-1665 Part 861C691G19 Pair of Drilled Linings & Fasteners Linings For 2 Brake Shoes XX Brass Rivets For a 16 Inch TM-1655 DC Brake aka E016053 Dated 1/18 (7LBS) - 223.00 C/F
83 WES-A200M4CAC Westinghouse Cutler-Hammer Starter Normally a stock item Dated 6/17 - 6250.00 C/F
84 WES-AK103 Westinghouse Brake OBSOLETE see CB-160 - Call C/F
85 WES-AK41 Westinghouse Brake OBSOLETE see CB-15 - Call C/F
86 WES-AK43 Westinghouse Brake OBSOLETE see CB-35 - Call C/F
87 WES-AK73 Westinghouse Brake OBSOLETE see CB-75 - Call C/F
88 WES-101350 Westinghouse DI-167F Lining - 73.62 C/F
89 WES-1591505 Westinghouse 12.5 OHM Resistor - 819.69 C/F
90 WES-1591508 Westinghouse 25 OHM Resistor - 819.69 C/F
91 WES-1591513 Westinghouse 80 OHM Resistor - 819.69 C/F
92 WES-367C530G16 Westinghouse Coil. Series Coil for a TM-1665 Brake. 230 VDC for a Frame 610 Mill Motor. 2 per brake Sold each - 4089.00 C/F
93 WES-501573 Westinghouse Coil. DI 135-F Series Brake Coil - 1643.52 C/F
94 WES-635C227G01 Westinghouse Brake Shoe & Lining Complete SEE E016025 For a TM-1665 or ET-16, 16 Inch Diameter Electric Brake Assembly Premium Non-Asbestos Material Bonded to the Brake Shoe Item 14 Qty. 1, 2 per brake, sold each (31LBS) H 12.00" L 9.00" W 12.00" - 1083.00 C/F
95 WES-635C247G17 Westinghouse Coil Part WES-635C247G17 16 Inch Shunt Brake Coil For a TM-1665 Brake Assembly 32 Volts per Coil Continuous Duty 40 Volts per coil Intermittent Duty Average Resistance 8.8 Ohms Item 26, 2 per brake, sold each Electrically Connected in Series Dated 1/18 - 5332.00 C/F
96 WES-637C729G16 Westinghouse Coil. Series Wound Coil for a TM-1985 Brake. Sold each. 2 Coils per brake sold individually / each, 637C729G16 812 614 - 7830.00 C/F
97 WES-645C173G22 Westinghouse Coil. Series Wound Coil on a TM63 Brake Assembly E006083 - 1115.00 C/F
98 WES-832942 Westinghouse Coil Brake Coil AK-43 220 Volt 60 Hz 50 FT LB Style 57N133 - 1033.75 C/F
99 WES-861C691G06 Westinghouse Lining Kit for AK Brake. Obsolete - Call C/F
100 WES-A200M4CX Westinghouse Contacts for a Size 4, 135 Amp contactor, Cat # 765A558609 - 280.00 C/F
Prices are subject to change without notice. Last updated: 23-Oct-2018 10:05:55 AM (EST)
 
Secure Online Order

 
Secure Online Order
 
78,328 part numbers available for
online order
 
Shopping Cart
Empty
Checkout is secure
 
All products are covered by a $1,000,000 liability insurance:
Click to view the Certificate

Products Available From Stock
Free shipping via UPS Ground (continental US only, motor freight excluded)
 
Web Site Features
 
Part Number Lookup
 
Enter at least three characters of a part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:
 
Part Number:

 
Search scope:
This web site only
All BPI web sites
 
Formal PDF Quotation
 
To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.
 
Your shopping cart is kept intact and you can still check out at a later time.
About Brake Products, Inc.
 
About Brake Products, Inc.
 
Brake Products, Inc. is more than an authorized distributor, we are real stocking distributor with inventory in excess of 2 million dollars. BPI has thousands of parts in our stock to protect your business with same day shipments till almost 7PM. With over 30 years of experience in the material handling business we are ready to assist you in making the right decisions for efficient motion control.
 
Brake Products specializes in the machining of Brake Wheels for AC & DC Industrial Brakes. We utilized CAD designed & engineered products with CNC machined tools to produce the "Perfect Brake Wheel" these wheels are not limited in design by a previously designed castings for universal use. BPI is an OEM brake wheel manufacturer for Crane Brake Manufacturers. Though we machine all the brake wheel surfaces for balance both static & dynamic balancing to your specification is available.
 
Please spend some time at our web site, an abundance of product information and CAD style PDF drawings are available to download & share. Pricing and a shopping cart for automated order entry can be done here. Please call with any questions. We would appreciate the opportunity to speak with you and provide a formal quotation.
 
Ductile Iron Brake Wheels

Ductile Iron Brake Wheels
 
We manufacture high-quality custom and standard brake wheels from 4-1/2" to 30" diameter, cast from the finest ASTM and ASME specified 80-60-03 Ductile Iron to provide maximum service and a high coefficient of friction. Machining is done on CNC equipment using solid dura bar or iron castings.
 
Brake wheels for all types of electric and hydraulically actuated brakes. Many wheels available for same day shipment; both pilot bore and finished bored for the 600 and 800 series mill motors.
 
Replacement Brake Parts

Replacement Brake Parts
 
Easily locate and purchase hard to find replacement parts for the following most popular OEM brake assemblies:
 
  •  EC&M
  •  SQUARE-D
  •  WESTINGHOUSE
  •  CUTLER-HAMMER
  •  GEMCO
  •  MONDEL
 
OEM brake assembly diagrams and selection tables, backed by our extensive replacement brake parts stock, makes it as easy as "1-2-3".
 
OEM Products

 
Brake Products is proud to maintain excellent decades-long distrubutor relationships with industry-leading Original Equipment Manufacturers (OEM). We keep most popular items in stock to improve delivery times. These products are available to quote and purchase 24/7 on our e-commerce web sites, along with a multitude of installation and support information:
 
  •  Gemco (Ametek)
  •  Gleason Reel
  •  Aero-Motive
  •  Cutler-Hammer (Eaton)
  •  Hubbell
  •  SuperBolt
  •  Telemotive (Magnetek)
  •  Renold
  •  Stearns
 
For online purchases, shipping is free within continental U.S.
Complete Price List
Prices and selection are subject to change according to the market situation. Price list may contain typos. Please feel free to call to confirm item pricing:
 
  • Brake Products, 77758 items
  • Cutler-Hammer, 6313 items
  • Eldro, 7 items
  • Renold Ajax, 399 items
  • Reuland, 113 items
  • Scan-Pac, 54 items
  • Superbolt, 110 items
  • Wagner, 248 items
  • Westinghouse, 100 items
 
Inventory items are shipped from stock. Non-inventory items may take up to two weeks to deliver.
 
Updated: Tuesday, October 23, 2018
 
Reels from Reelcraft

Reels from Reelcraft
 
Reelcraft manufactures over twenty five hundred models of hose, cord and cable reels, as diverse as heavy duty hose reels used in the light, medium, and heavy industry, automotive service and a wide variety of OEM applications. These models include spring retractable, motor driven and hand crank reels, handling hose lengths up to six hundred feet and ranging from 1/4 inch to 4 inches in diameter and beyond. The spring retractable models are widely used in industrial applications to improve efficiency and safety by keeping hoses and cables off the floor as well as maintenance areas to provide air or power when and where it is needed.
 
Non-Asbestos Overhead Crane Linings from Scan-Pac

Non-Asbestos Overhead Crane Linings from Scan-Pac
 
The industrial marketplace has a variety of brake and clutch requirements for overhead cranes. Scan-Pac's technical and application expertise can recommend and furnish the proper material to meet the specific need your operation demands. Numerous specific parts have been molded or machined to meet the unique requirements of a special application. Let Scan-Pac solve those vexing problems in your day-to-day production.
 
Scan-Pac's RF38 material has been accepted as a well proven material for these applications and has been in use for several decades.
 
 
 
Industrial Brakes and Brake Parts from Reuland

Industrial Brakes and Brake Parts from Reuland
 
Reuland offers a wide variety of brakes for various applications. Popular MagnaStop brake is a solenoid activated, spring set type brake. The MagnaStop brake is available in standard and dust-tight/waterproof enclosures in standard AC voltages. Torque ratings available range from (1.5-20) lb. Ft. The brake can be ordered as a traditional C-face mount or as a "double C-face" design. The MagnaStop can also be ordered as foot mounted design.
 
Reuland also offers a wide range of direct acting magnetic disc brakes. These brakes are also available as standard, dust-tight/waterproof, or marine duty enclosures. Torque ratings available vary from 1.5 to 1000 lb. Ft. Reuland brakes are defined as "fail safe". When power is applied to the brake, the brake releases the motor shaft. The load is then free to turn. When power is removed or lost, the brake grabs the motor shaft and stops the load. A brake release knob or flipper is provided to manually release the brake. Reuland offers both adjustable and non-adjustable designs. Reuland brakes are available in both single and three phase designs. Some brakes are available in DC power. Finally, Reuland offers it's "X" series brakes. These brakes are designed to mount to non-Reuland built motors.  
Industrial Brakes and Brake Parts from Wagner

Industrial Brakes and Brake Parts from Wagner
 
Our knowledge is second to none in regard to the old style Wagner brake. It may be worth knowing that Wagner Brake itself has not manufactured this style brake since 1981, yet we have never stopped supplying this brake to our large distributor network.
 
When it comes to air brake parts, our company roots go way back. We have an extensive library of air brake catalogs which has supplied our customers well over the years. Our knowledge is based mostly on the Bendix (formerly Bendix-Westinghouse), Wagner Air Brake, and the Midland Air Brake line.
 
 
This web site is owned and operated by Brake Products, Inc.
Brake Products, Inc.   16751 Hilltop Park Place
  Chagrin Falls, Ohio 44023
  Phone: (440) 543-7962
  Fax:     (440) 543-7963
  Web:   www.brakeproducts.com
  Email: sales@brakeproducts.com
  Federal ID #: 34-1473351
  CAGE Code: 1QTP8
  DUNS# 14-748-2392
  Download: Form W-9
Supplier of Industrial Brake Parts Since 1985