Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)
 
 
 
 
 
  BRAKE PRODUCTS
75,544 part numbers: Brake Wheels & Discontinued Brake Parts
  GEMCO
14,152 part numbers: Motion Control Products
 
  GLEASON
21,298 part numbers: Cable & Hose Management Systems
  AERO-MOTIVE
3,611 part numbers: Cable & Hose Management Systems
  CUTLER-HAMMER
6,317 part numbers: Electrical Control Products
 
 
 
 
 
  STEARNS
6,612 part numbers: Motor Mounted Brakes
  HUBBELL
16,072 part numbers: Electrical Control Products
  SUPERBOLT
109 part numbers: Fastening Solutions
  TELEMOTIVE
2,463 part numbers: Radio Remote Control
  RENOLD
401 part numbers: Mechanical Power Transmission Products
 
 

Aero-Motive Direct
Amazon Store

 
69 part numbers
 

Brake Products
Amazon Store

 
553 part numbers
 
 
Check out our expanded Wagner inventory:
 
 

 
 
Web: www.BrakeProducts.com Email: sales@BrakeProducts.com Phone: (888) 861-8777
 
PRODUCTS AVAILABLE FROM STOCK
Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 BPI-50001 Brake Products Coupling Flexible Spider Coupling For 2, 3/4 Inch Shafts Used with 1980 Series Gemco Cam Limit Switches which have a 3/4 Inch Main Shaft Overall Length xx.xx Inches Required Space xx.xx Inches (2LBS) H 4.00" L 5.00" W 4.00" [Amazon] 2 $46.00   Call
2 BPI-50002 Brake Products Coupling Flexible, Laser Cut Spring Coupling 1/2 Inch to 1/2 Inch Used with 2000, 2006 GR Limit Switches which have a 1/2 Main Shaft Overall Length xx.xx Inches Required Space xx.xx Inches (2LBS) H 4.00" L 5.00" W 4.00" [Amazon] 3 $38.00   Call
3 BPI-50003 Brake Products Coupling Flexible Spider Coupling Complete both half and Flexible spider One Half has a 3/4 Inch Bore 0.75 One Half has a 5/8 Inch Bore 0.625 With Keyways and set screws (3LBS) H 4.00" L 8.00" W 4.00" [Amazon] 1 $52.00   Call
4 BPI-50021 Coupling Part BPI-50021 Flexible Mechanical Coupling 2 Flexible Leaf Spring agents to accommodate angular misalignment only Engineered for 0 Lash 1/2 to 1/2 Inch Bores W/O Keyways Clamps on Shafts via Split Hub with Set Screws Bores can be enlarged and keyed (2LBS) H 4" L 5" W 4" Box [Amazon] [1/2017] 1 $135.00   Call
5 BPI-BE049001 Brake Products Brake Wheel 4 Inch Part BE049001 Pilot / Rough Bore Brake Wheel D = 4.00 Inch Diameter F = 2.75 Inch Face Width O = 2.00 Inch Offset face centerline to hub edge 0.625 Inch Offset face edge to hub edge H = 2.50 Inch Hub Length D = 0.25 Inch Pilot Hub Bore 3.375 Inch Overall Width For 511H 4 Inch Brakes CNC Machined From QS9000 Continuous Cast Ductile Iron 80-55-06 UPS able [Amazon] Dated 1/18 (4LBS) H 4" L 4" W 4" Box 2 $280.00   Call
6 BPI-BE050001 Brake Products Brake Wheel 5.5 Inch Part BE050001 With a Pilot / Rough Bore D = 5.50 Inch Diameter F = 3.25 Inch Face Width O = 2.00 Inch Offset face centerline to hub edge 0.375 Inch Offset face edge to hub edge H = 2.00 Inch Hub Length B = 0.625 Inch Pilot Hub Bore 3.625 Inch Overall Width For CB-35 Brakes aka 511H1160-1 CNC Machined From QS9000 Continuous Cast Ductile Iron 80-55-06 UPS able Dated 1/18 (7LBS) H 4" L 6" W 6" Box - 1 $420.00   Call
7 BPI-BE059001 Brake Products Brake Wheel 5.5 Inch Part BE059001 With a Pilot / Rough Bore D = 5.50 Inch Diameter F = 3.25 Inch Face Width O = 2.00 Inch Offset face centerline to hub edge 0.375 Inch Offset face edge to hub edge H = 2.00 Inch Hub Length B = 0.625 Inch Pilot Hub Bore 3.625 Inch Overall Width For CB-35 Brakes aka 511H1160-1 CNC Machined From QS9000 Continuous Cast Ductile Iron 80-55-06 UPS able [Amazon] Dated 1/18 (7LBS) H 4" L 6" W 6" Box 3 $420.00   Call
8 BPI-BE069022 Brake Wheel 6 Inch Diameter with a finished bore & keyway - 2 $620.00   Call
9 BPI-BE071012 Brake Wheel 7 Inch Diameter with a finished bore & keyway - 1 $385.00   Call
10 BPI-BE081001 Brake Products Brake Wheel 8 Inch Part BE081001 Pilot / Rough Bore Brake Wheel D = 8.00 Inch Diameter F = 3.25 Inch Face Width O = 4.00 Inch Offset face centerline to hub edge 2.375 Inch Offset face edge to hub edge H = 4.5 Inch Hub Length B = 0.500 Inch Pilot Bore 5.625 Inch Overall Width For TM-83, GH505A, IC9528A100, 5010F08 & ET-8 Brakes aka E008500 CNC Machined From QS9000 Continuous Cast Ductile Iron 80-55-06 UPS able [Amazon] Dated 1/18 (27LBS) H 6" L 8" W 8" Box 1 $620.00   Call
11 BPI-BE081015 Brake Wheel 8 Inch Diameter Part BE081015 Electric, Offset Style, 3.25" Face Width With a Hub Length, Bore & Keyway For: 603, 604, 803 & 804 Mill Motors Brake Products Brake Wheel 8 Inch Part BPI-BE081015 With a Finished Bore & Keyway For a 603, 604, 803, 804 Mill Motors With the AIST Standard Offset 8.00 Inch Diameter 3.25 Inch Face Width 4.00 Inch Offset face centerline to hub edge 3.50 Inch Offset face edge to hub edge 2.375 Inch Hub Length 2.00 Inch Hub Bore Diameter 1.25 Inch / Foot Taper Bore 5.625 Inch Overall Width aka AME-E008500 & GH505-JX-A02 CNC Machined From QS9000 Continuous Cast Ductile Iron 80-55-06 UPSable (29LBS) H 6" L 8" W 8" Box - 1 $1,449.00   Call
12 BPI-BE081201 Brake Wheel 8 Inch Diameter 4.25 Inch Face width 3.875 Inch Offset 5.25 Inch Hub Length 0.50 Inch Pilot Bore 21 $490.00   Call
13 BPI-BE081205 Brake Wheel 8 Inch Diameter with a finished bore, keyway & 2 drilled & tapped holes (23LBS) E008548-002 - 1 $640.00   Call
14 BPI-BE089101 Brake Wheel 8 Inch Diameter with a Finished Bore & Keyway - 1 $620.00   Call
15 BPI-BE101001 Brake Products Brake Wheel 10 Inch Part BE101001 Pilot / Rough Bore Brake Wheel D = 10.00 Inch Diameter F = 3.75 Inch Face Width O = 4.25 Inch Offset face centerline to hub edge 2.375 Inch Offset face edge to hub edge H = 4.50 Inch Hub Length B = 1.00 Inch Pilot Hub Bore 6.125 Inch Overall Width For TM-1035, GH505B, IC9528B100, 501010 & ET-10 Brakes aka AME-E010500 CNC Machined From QS9000 Continuous Cast Ductile Iron 80-55-06 UPS able [Amazon] Dated 1/18 (45LBS) H 7" L 10" W 10" Box 4 $680.00   Call
16 BPI-BE101003 Brake Products Brake Wheel 10 Inch Diameter Part BPI-BE101003 With a Finished Bore & Keyway D = 10.00 Inch Diameter F = 3.75 Inch Face width O = 3.125 Inch Hub Offset, when measured from centerline of face 1.25 Inch Hub Offset, when measured from face edge H = 3.00 Inch Hub Length B = 2.375 Inch Hub Bore Diameter 0.625 X 0.313 Inch Keyway 5.00 Inch Overall Width aka CNC Machined From QS9000 Continuous Cast Ductile Iron 80-55-06 UPSable (34LBS) H 5" L 10" W 10" Box - 1 $860.00   Call
17 BPI-BE101014 Brake Products Brake Wheel 10 Inch Part BPI-BE101014 With a Finished Bore & Keyway For 403 404 603 604 803 804 MCS4 MD404AE Motors D = 10.00 Inch Diameter F = 3.75 Inch Face Width O = 4.25 Inch Offset face centerline to hub edge 2.375 Inch Offset face edge to hub edge H = 3.50 Inch Hub Length B = 2.00 Inch Hub Bore Diameter 1.635 Inch Small Bore Diameter 1.25 Inch Taper / Foot 0.500 X 0.250 Keyway 6.125 Inch Overall Width Cast from ASTM A 536 Ductile Iron 80-55-06 (44LBS) H 6" L 10" W 10" Box - 1 $860.00   Call
18 BPI-BE101040 Brake Wheel - 1 $860.00   Call
19 BPI-BE101192 Brake Wheel 10 Inch Diameter With a 4.5 Inch Face Width Pilot Bore Offset Electric Style (54BS) H 8.00" L 10.00" W 10.00" 8 $860.00   Call
20 BPI-BE101193 Brake Wheel 10 Inch Diameter With a Hub Length Bore & Keyway for a MD102 Mill Motor (40LBS) - 2 $860.00   Call
21 BPI-BE101197 Brake Wheel 10 Inch Diameter with a Finished Bore & Keyway - 2 $860.00   Call
22 BPI-BE103004 Brake Wheel 10 Inch Diameter with a pilot bore (55LBS) - 1 $720.00   Call
23 BPI-BE109013 Brake Wheel 10 Inch Diameter with a finished bore & keyway - 1 $860.00   Call
24 BPI-BE111001 Brake Products Brake Wheel 11 Inch Part BE111001 Pilot / Rough Bore Brake Wheel D = 11.00 Inch Diameter Brake Wheel F = 5.00 Inch Face Width O = 3.50 Inch Offset, from face centerline 1.00 Inch Offset, from face edge H = 9.25 Inch Hub Length B = 3.25 Inch Diameter Pilot Bore 6.00 Inch Overall Length For 11 Inch Brakes CNC Machined from QS9000 Continuous Cast Ductile Iron 80-55-06 Normally a Stock Item @ BPI UPS able [Amazon] Dated 1/18 (60LBS) H 6" L 11" W 11" Box 1 $860.00   Call
25 BPI-BE129001 Brake Products Brake Wheel 12 Inch Part BPI-BE129001 Pilot / Rough Bore Brake Wheel D = 12.00 Inch Diameter F = 5.25 Inch Face Width O = 2.625 Inch Offset face centerline to hub edge 0.00 Inch Offset face edge to hub edge H = 5.25 Inch Hub Length B = 1.00 Inch Diameter Pilot Bore 5.25 Inch Overall Width Cast from ASTM A 536 Ductile Iron 80-55-06 Dated 1/18 Normally a Stock Item @ BPI Motor Freight Only (80LBS) H 5" L 12" W 12" on a Skid - 1 $1,080.00   Call
26 BPI-BE131001 Brake Products Brake Wheel 13 Inch Part BE131001 Pilot / Rough Bore Brake Wheel D = 13.00 Inch Diameter F = 5.75 Inch Face Width O = 5.370 Inch Offset face centerline to hub edge 2.495 Inch Offset face edge to hub edge H = 5.00 Inch Hub Length D = 1.00 Inch Pilot Hub Bore 8.245 Inch Overall Width For TM-1355, GH505C, IC9528C100, 5010F13 & ET-13 Brakes aka AME-E013500 CNC Machined From QS9000 Continuous Cast Ductile Iron 80-55-06 UPS able [Amazon] Dated 1/18 (95LBS) H 9" L 13" W 13" Box 4 $964.00   Call
27 BPI-BE131004 Brake Products Brake Wheel 13 Inch Part BPI-BE131004 With a Finished Bore & Keyway For a 608 & 808 Mill Motor 13.00 Inch Diameter 5.75 Inch Face Width 5.375 Inch Offset face centerline to hub edge 2.50 Inch Offset face edge to hub edge This is the AIST Standard Offset 4.50 Inch Hub Length 3.00 Inch Hub Bore 1.25 Inch Taper / Foot 0.75 X 0.25 Keyway 8.25 Inch Overall Width UPSable (90LBS) H 9" L 13" W 13" Box - 1 $1,228.00   Call
28 BPI-BE131006 Brake Products Brake Wheel 13 Inch Part BPI-BE131006 With a Finished Bore & Keyway For 412 612 812 AC25 AC30 MCS12 MD412AE MD412AE2 Motors With the Standard AIST Offset D = 13.00 Inch Diameter F = 5.75 Inch Face Width O = 5.375 Inch Offset face centerline to hub edge 2.50 Inch Offset face edge to hub edge H = 5.00 Inch Hub Length B = 3.625 Inch Hub Bore 3.104 Small Bore Diameter 1.25 Inch Taper / Foot 0.75 X 0.25 Inch Keyway 8.250 Inch Overall Width aka 171B3452P20 GH505LXC05 E013520 364388 CNC Machined From QS9000 Continuous Cast Ductile Iron 80-55-06 Dated 11/17 Normally a Stock Item @ BPI UPSable (92LBS) H 8" L 13" W 13" Box - 4 $1,228.00   Call
29 BPI-BE131067 Brake Wheel 13 Inch Diameter - 1 $1,228.00   Call
30 BPI-BE131100 Brake Wheel 13 Inch Diameter - 1 $1,228.00   Call
31 BPI-BE131119 Brake Wheel 13 Inch Diameter - 1 $1,228.00   Call
32 BPI-BE133001 Brake Wheel, Pilot Bore 13 Inch Diameter, 5.75" Face Width, 6.375" Offset when measured from the centerline of the face, 5.00" Hub Length with a 1 Inch Pilot Bore. 110 LBS Add $ 194.00 to finish the hub offset, length, bore & keyway. 2 other 13 Inch Brake Wheels are available with shorter offsets. - 34 $890.00   Call
33 BPI-BE139105 Brake Wheel 13 Inch Diameter with a finished bore & keyway (66LBS) - 1 $1,080.00   Call
34 BPI-BE161006 Brake Products Brake Wheel 16 Inch Part BPI-BE161006 With a Finished Bore & Keyway For a 416 616 816 Mill Motor D = 16.00 Inch Diameter F = 6.75 Inch Face Width O = 6.50 Inch Offset face centerline to hub edge 3.125 Inch Offset face edge to hub edge H = 5.50 Inch Hub Length B = 4.625 Inch Hub Bore Diameter 4.052 Small Bore Diameter 1.25 Inch Taper / Foot 0.75 X 0.25 Keyway 9.875 Inch Overall Width aka 118B8887P8 GH505MXD06 Motor Freight Only (140LBS) H 10" L 16" W 16" on a skid - 1 $1,760.00   Call
35 BPI-BE161019 Brake Wheel 16 Inch Diameter - 1 $1,760.00   Call
36 BPI-BE162001 Brake Wheel 16 Inch Diameter with a pilot bore - 4 $1,620.00   Call
37 BPI-BE163001 Brake Wheel 16 Inch Diameter, Pilot Bore - 1 $1,380.00   Call
38 BPI-BE164012 Brake Wheel 16 Inch Diameter with a finished bore & keyway - 3 $1,880.00   Call
39 BPI-BE169030 Brake Wheel 16 Inch Universal Pilot Bore GH505MXD07 - 3 $1,840.00   Call
40 BPI-BE191037 Brake Wheel 19 Inch Diameter - 1 $2,380.00   Call
41 BPI-BE191038 Brake Wheel 19 Inch Diameter - 2 $2,380.00   Call
42 BPI-BE192001 Brake Wheel 19 Inch Diameter with a 1.0 Inch Pilot Bore. Face Width 8.75 ", Offset from C.L. 6.375", Hub Length 8.125" (230LBS) - 8 $2,100.00   Call
43 BPI-BE192002 Brake Wheel 19 Inch Diameter - 1 $2,400.00   Call
44 BPI-BE192004 Brake Wheel 19 Inch Diameter - 1 $2,400.00   Call
45 BPI-BE201001 Brake Wheel 20 Inch Diameter - 3 $2,230.00   Call
46 BPI-BE201020 Brake Wheel 500 MM Diameter with a pilot bore - 1 $2,440.00   Call
47 BPI-BE211009 Brake Wheel 21 Inch Diameter with a Hub Length Bore & Keyway for a 612 Mill Motor - 1 $2,190.00   Call
48 BPI-BE231202 Brake Wheel 23 Inch Diameter with a Pilot Bore - 2 $4,620.00   Call
49 BPI-BE231241 Brake Wheel 23 Inch Diameter with a finished bore, 2 Keyways & tapped holes - 1 $5,280.00   Call
50 BPI-BE232001 Brake Wheel 23 Inch Diameter with a Pilot Bore - 4 $4,620.00   Call
51 BPI-BE268011 Brake Wheel 26 Inch Diameter with a 4 Inch Pilot Bore - 1 $8,700.00   Call
52 BPI-BE301001 Brake Products Brake Wheel 30 Inch Diameter Part BPI-BE301001 D = 30 Inch Diameter Pilot / Rough Bore Brake Wheel F = 14.25 Inch Face Width O = 10.75 Inch Offset, from face centerline 3.635 Inch Offset, from face edge H = 9.25 Inch Hub Length B = 2.75 Inch Diameter Pilot Bore 17.875 Inch Overall Length Qty 4, 3 Inch Diameter Pulling / Lifting Holes Spaced 90 Degrees Cast from ASTM A 536 Ductile Iron 80-55-06 aka AME-E030500 Dated 10/17 Normally a Stock Item @ BPI Dated 10/17 Motor Freight Only (910LBS) H 18" L 30" W 30" On a Skid - 2 $6,370.00   Call
53 BPI-BE301002 Brake Products Brake Wheel 30 Inch Part BPI-BE301002 With a Finished Bore & Keyway For 416, 616 & 816 Mill Motors D = 30.00 Inch Diameter F = 14.25 Inch Face Width O = 10.25 Inch Offset face centerline to hub edge 3.125 Inch Offset face edge to hub edge This is the AIST Standard Offset H = 5.50 Inch Hub Length B = 3.625 Inch Hub Bore 1.25 Inch Taper / Foot 1.25 X 0.375 Keyway 17.375 Inch Overall Width Qty 4, 3 Inch Diameter Pulling / Lifting Holes Spaced 90 Degrees Cast from ASTM A 536 Ductile Iron 80-55-06 Dated 10/17 Normally a Stock Item @ BPI aka GH505RXG01 Motor Freight Only (875LBS) H 18" L 30" W 30" on a Skid - 1 $6,820.00   Call
54 BPI-BE308016 Brake Wheel 30 Inch Diameter with a finished bore & keyway. Large Diameter Bore - 1 $7,810.00   Call
55 BPI-BH061001 Brake Products Brake Wheel 6 Inch Part BH061001 Pilot / Rough Bore Brake Wheel D = 6 Inch Diameter Brake Wheel F = 3.25 Inch Face Width O = 3.125 Inch Offset, from face centerline 1.25 Inch Offset, from face edge H = 3.50 Inch Hub Length B = 0.375 Inch Diameter Pilot Bore 4.75 Inch Overall Length For TM-63 & ET-6 aka AME-E006500 CNC Machined From QS9000 Continuous Cast Ductile Iron 80-55-06 Normally a Stock Item @ BPI [Amazon] Dated 1/18 (24LBS) H 5" L 6" W 6" Box 17 $430.00   Call
56 BPI-BH061009 Brake Wheel 6 Inch Diameter with a finished bore, keyway. Drilled & taped for 2 set screws. 1 above keyway 1 @ 90 degrees - 6 $480.00   Call
57 BPI-BH061112 Brake Wheel 6 Inch Diameter with a finished bore and keyway - 1 $620.00   Call
58 BPI-BH081001 Brake Products Brake Wheel 8 Inch Part BH081001 Pilot / Rough Bore Hydraulic Brake Wheel D = 8.00 Inch Diameter F = 3.25 Inch Face Width O = 3.125 Inch Offset face centerline to hub edge 1.50 Inch Offset face edge to hub edge H = 4.00 Inch Hub Length B = 0.50 Inch Pilot Hub Bore 3.50 Inch Hub Outside Diameter 4.75 Inch Overall Width For aka AME-J076200 From QS9000 Continuous Cast Ductile Iron 80-55-066 Dated 1/18 Normally a Stock Item @ BPI UPS able [Amazon] Dated 1/18 (34LBS) H 5" L 8" W 8" Box 14 $740.00   Call
59 BPI-BH089001 Brake Products Brake Wheel 8 Inch Part BPI-BH089001 Pilot / Rough Bore Hydraulic Brake Wheel D = 8.00 Inch Diameter F = 3.25 Inch Face Width O = 3.125 Inch Offset face centerline to hub edge 1.50 Inch Offset face edge to hub edge H = 4.00 Inch Hub Length B = 0.50 Inch Pilot Hub Bore 3.50 Inch Hub Outside Diameter 4.75 Inch Overall Width For aka AME-J076200 From QS9000 Continuous Cast Ductile Iron 80-55-066 Dated 1/18 Normally a Stock Item @ BPI UPSable (34LS) H 5" L 8" W 8" Box - 5 $620.00   Call
60 BPI-BH101001 Brake Products Brake Wheel 10 Inch Hyd Style Part BH101001 Pilot / Rough Bore Brake Wheel D = 10.00 Inch Diameter F = 4.25 Inch Face Width O = 3.125 Inch Offset face centerline to hub edge 1.00 Inch Offset face edge to hub edge H = 5.50 Inch Hub Length 1.00 Inch Pilot Bore Diameter 5.50 Inch Overall Width aka AME- CNC Machined From QS9000 Continuous Cast Ductile Iron 80-55-06 UPS able [Amazon] Dated 1/18 (60LBS) H 6" L 10" W 10" Box 1 $810.00   Call
61 BPI-BH101178 Brake Wheel 10 Inch Diameter with a pilot bore - 7 $890.00   Call
62 BPI-BH141016 Brake Wheel 14 Inch Diameter - 3 $1,580.00   Call
63 BPI-BH141024 Brake Wheel 14 Inch Diameter - 2 $1,580.00   Call
64 BPI-BH181001 Brake Products Brake Wheel 18 Inch Part BPI-BH181001 Pilot / Rough Bore Brake Wheel D = 18.00 Inch Diameter F = 8.50 Inch Face Width O = 5.250 Inch Offset face centerline to hub edge 1.00 Inch Offset face edge to hub edge H = 6.375 Inch Hub Length D = 1.50 Inch Pilot Hub Bore 9.50 Inch Overall Width For 18 Inch Hydraulic Brakes aka J076300 & JE76300 Cast from ASTM A 536 Ductile Iron 80-55-06 Motor Freight Only (230LBS) H 10" L 18" W 18" on a Skid - 2 $1,890.00   Call
65 BPI-BH181003 Brake Wheel 18 Inch Diameter Part BPI-BH181003 Hydraulic Style Brake Wheel / Symmetrical Hub Length Bore & Keyway For 416, 616, 816 Motors D = 18 Inch Wheel Diameter F = 8.50 Inch Face Width O = 5.25 Inch Offset, when measured from face centerline 1.00 Inch Offset, when measured from face edge H = 5.50 Inch Hub Length B = 4.625 Inch Diameter Tapered Bore 1.25 Inch Taper / Foot 1.25 X 0.375 Keyway 9.5 Inch Overall Width aka Cast from ASTM A 536 Ductile Iron 80-55-06 Dated 10/17 Motor Freight Only (230LBS) H 10" L 18" W 18" on a Skid - 1 $2,290.00   Call
66 BPI-BH181004 Brake Wheel 18 Inch Diameter Part BPI-BH181004 Hydraulic Style Brake Wheel / Symmetrical Hub Length Bore & Keyway For 608 & 808 Motors D = 18 Inch Wheel Diameter F = 8.50 Inch Face Width O = 4.875 Inch Offset, when measured from face centerline 0.625 Inch Offset, when measured from face edge H = 4.50 Inch Hub Length B = 3.00 Inch Diameter Tapered Bore 1.25 Inch Taper / Foot 0.75 X 0.250 Keyway 9.125 Inch Overall Width aka JE76306 J076306 JFE 1581 Cast from ASTM A 536 Ductile Iron 80-55-06 Dated 10/17 Motor Freight Only (230LBS) H 10" L 18" W 18" on a Skid - 1 $2,290.00   Call
67 BPI-BH181012 Brake Wheel 18 Inch Diameter - 2 $2,290.00   Call
68 LIN-064-3038D-RF-38 Brake Lining Part LIN-064-3038D-RF-38 For Gemco / Wagner Hyd Brake Parts J023020 & J023020 6 Inch Diameter 3/8 Inches Thick 3 Inches Wide 5 & 5/16 Inches Long 6 Drilled & Countersunk Holes RF38 Non-Asbestosis Material aka J023024 (1LB) - 31 $42.27   Call
69 LIN-064-3038-RF-38 Brake Lining for an 6 Inch Diameter Wagner Hyd Brake. 3/8 Inches Thick, 3 Inches Wide, 5 & 5/16 Inches, RF38 Non-Asbestosis Material J023024 (1LB) H 4.00" L 10.00" W 7.00" [Amazon] 4 $30.96   Call
70 LIN-082-3042D-RF-38 Brake Lining 8 Inch Part 082-3042D-RF-38 8 Inch Diameter 3 Inch Width 1/4 Inch Thick 5 & 3/8 Inches Long across the back With 4 Drilled & Countersunk Holes for 8-10 Rivets RF-38 Premium Non-Asbestos Material MSDS document on file Sold each, 2 per brake Dated 7/18 (1LBS) H 4" L 8" W 4" Box - 2 $40.10   Call
71 LIN-082-3042-RF-34 Brake lining - Drum OD: 8", OEM: Square-D, Material: RF-34, Thickness: 1/4", Width: 3", Length: 5 3/8". Non-OEM replacement part - 8 $36.79   Call
72 LIN-082-3042-RF-38 Brake Lining, 8 Inch Diameter, 3 Inch Width, 1/4 Inch Thick, 5 & 3/8 Inches Long across the back, RF-38 Non Asbestos Material, MSDS document on file (1LB) SQD (1LBS) H 6.00" L 7.00" W 10.00" [Amazon] - 6 $29.89   Call
73 LIN-084-3044D-RF-38 Scan Pac Brake Lining 8 Inch Diameter 0.375 Inch Thick 3 Inches Wide 7 & 1/16 Inches Long 8 Drilled and Countersunk Holes For Brass Fasteners not included Wagner / Ametek Gemco Hydraulic Brake J007846 RF38 Premium Non-Asbestos Material Sold Each, 2 pr brake [Amazon] (3LB) H 4" L 7" W 4" Box 52 $54.34   Call
74 LIN-103-3440D-RF-38 Brake Lining, 10 Inch Diameter 5/16th Inch Thick 3 & 1/2 Inches Wide 4 & 1/8 Inches Long Premium RF-38 Non-Asbestos Material 51001-071-51, 5910-T, #10 Type WB Folio 2, WB-118 4 Drilled Holes, 2 pieces per brake shoe (1LBS) H 5.00" L 10.00" W 9.00" [Amazon] 4 $31.80   Call
75 LIN-103-3445D-RF-38 Brake Lining Material 10 Inch Diameter Premium RF-38 Non Asbestos Material Diameter 10 Inch Thickness 0.3125 Inch Width 3.5 Inches Length 6.625 Inch 1 piece per brake shoe Part 103-3445D-RF-38 50903-808-52 Class 5010 Type F Series A or B (1LB) H 4" L 10" W 4" Box [Amazon] 3 $34.88   Call
76 LIN-104-3423-RF-38 Brake Lining Part LIN-104-3423-RF-38 10 Inch Diameter 3.50 Inches Wide 8.50 Inches Long along the back 3/8 Inch Thick RF38 Premium non-Asbestos Material Dated 5/17 [Amazon] (3LBS) H 6" L 10" W 7" Box 3 $39.72   Call
77 LIN-104-3445-RF-38 Brake Lining, 10 Inch Diameter, 3/8 Inches Thick, 3 & 1/2 Inches Wide, 6 & 5/8 Inches Long, RF38 Premium Non-Asbestos Material, MSDS Supplied, Undrilled for a Gemco / Westinghouse TM-1035 Brake Shoe, 1 per brake shoe, sold each (1LB) (2LBS) H 3.00" L 6.00" W 3.00" [Amazon] box 36 $28.57   Call
78 LIN-105-4023-RF-34 Brake lining - Drum OD: 10", OEM: Wagner, Material: RF-34, Thickness: 1/2", Width: 4", Length: 8 1/2", Drilled Holes: 8. Non-OEM replacement part (3LBS) H 6" L 14" W 10" Box [Amazon] 4 $42.86   Call
79 LIN-10-8 Rivet, 10-8 for a TM-83 Brake Assembly - 200 $0.50   Call
80 LIN-134-5421-RF-38 Brake lining - Drum OD: 13", Material: RF-38, Thickness: 3/8", Width: 5 1/2", Length: 8". Non-OEM replacement part (3LBS) H 6.00" L 14.00" W 10.00" [Amazon] 4 $100.00   Call
81 LIN-134-5432-RF-38 Brake Lining for a 13 Inch Diameter Brake Series GH505 DC Brake 915F84-1 3/8 Inch Thick 5.5 Inches Wide 10.75 Inches Long RF38 Premium Non- Asbestos Lining Material Date 5/17 - 3 $74.10   Call
82 LIN-134-5435-RF-34 Brake lining - Drum OD: 13", Material: RF-34, Thickness: 3/8", Width: 5 1/2", Length: 11 1/2". Non-OEM replacement part (3LBS) H 6.00" L 14.00" W 10.00" [Amazon] 4 $55.33   Call
83 LIN-134-5438-RF38 Brake Lining (1LB) H 4" L 10" W 4" Box [Amazon] 3 $49.00   Call
84 LIN-135-5238D-RF-38 Brake lining - Drum OD: 13", OEM: Square-D, Material: RF-38, Thickness: 1/2", Width: 5 1/4", Length: 5 7/16", Drilled Holes: 6. Non-OEM replacement part (1LBS) H 6.00" L 7.00" W 10.00" [Amazon] 6 $54.40   Call
85 LIN-135-5238-RF-38 Brake lining - Drum OD: 13", OEM: Square-D, Material: RF-38, Thickness: 1/2", Width: 5 1/4", Length: 5 7/16". Non-OEM replacement part 6/6 (1LBS) H 6.00" L 7.00" W 10.00" [Amazon] 4 $31.78   Call
86 LIN-135-5424 Brake Lining for a Class 5010 13 Inch Type F Series A or B Brake. RF38 Material , 0.438 Thick, 5.50 Inches Wide, 8.75 Inches Long across back. No fastener holes. Sold each, 1 piece per brake shoe. 50903-808-52 - 13 $78.34   Call
87 LIN-135-5432-RF-38 Brake Lining, 13 Inch Diameter, 5.5 Inch Wide, 1/2 Inch Thick, 10.75 Inches Long across the back, RF-38 Non Asbestos Material. MSDS Sheet on file (3LBS) H 6.00" L 14.00" W 10.00" [Amazon] 13 $80.16   Call
88 LIN-135-5438D-RF-38 Brake Lining 13 for a Sq-D 13 Inch Diameter Electric Brake, RF-38 Premium Material, 1/2 Inch Thick X 5 1/2 Inches Wide X 5 & 7/16 Inches Long, Qty. 6, Drilled & Countersunk Holes for Fastening to the Brake Shoe. 2 required per Brake Assembly, sold each - 6 $64.60   Call
89 LIN-135-5438-RF-38 Brake Lining For a 13 Inch Diameter SQ-D Brake 1/2 Inch Thick 5.5 Inches Wide 5 & 7/16 Inches Long RF38 Material 9/8 (3LBS) H 6" L 14" W 10" Box [Amazon] 4 $48.57   Call
90 LIN-145-6036D-RF-34 Brake Lining Scan-Pac Lining Material 14" Part 145-6036D-RF-34 For a Gemco / Wagner 14 Inch Diameter Hydraulic Brake RF-34 Premium Non-Asbestos Material 1/2 Inch Thick 6 Inches Wide 11 & 3/4 Inches Long across the back Qty. 8, Drilled & Countersunk Holes For Brass Fasteners which are not included 2 Linings required per Brake, sold each Color Light Green (3LBS) H 6.00" L 1400" W 10.00" - 16 $67.30   Call
91 LIN-145-6036D-RF-38 Brake Lining Scan-Pac Lining Material 14" Part 145-6036D-RF-38 For a Gemco / Wagner 14 Inch Diameter Hydraulic Brake RF-38 Premium Non-Asbestos Material 1/2 Inch Thick 6 Inches Wide 11 & 3/4 Inches Long across the back Qty. 8, Drilled & Countersunk Holes For Brass Fasteners which are not included 2 Linings required per Brake, sold each Color Light Green (3LBS) H 6.00" L 1400" W 10.00" - 6 $86.36   Call
92 LIN-145-6036-RF-38 Brake Lining Scan-Pac Lining Material 14" Part 145-6036-RF-38 For a Gemco / Wagner 14 Inch Diameter Hydraulic Brake RF-38 Premium Non-Asbestos Material 1/2 Inch Thick 6 Inches Wide 11 & 3/4 Inches Long across the back 2 Linings required per Brake, sold each Color Light Green (3LBS) H 6.00" L 14.00" W 10.00" [Amazon] 4 $86.36   Call
93 LIN-15123 Brake Lining with Metal Backing, GE , 151-A-7931, IC9528A105K1AA1, 305A4800P6, PP-6-KO, 23 Inch - 4 $238.00   Call
94 LIN-151A7931P2 Brake Lining and Support Plate Assembly Part LIN-151A7931P2 For a GE 10 Inch IC9528 Brake Lining includes bonded metal backing plate Scan-Pac Premium Non-Asbestos RF-38 Lining Material MSD sheets included THIS IN A NON-OEM PRODUCT Dated 9/17 (3LBS) H 5" L 8" W 5" Box - 4 $141.00   Call
95 LIN-151A7931P3 Brake Lining and Support Plate Assembly Part 151A7931P3 New Part 305A4800P2 For a 10 Inch IC9528101 Brake Lining includes the bonded metal backing plate that facilitates the attachment to the brake shoe Scan-Pac Premium Non-Asbestos RF-38 lining material MSDS will be included This is a NON-OEM AFTER0MARKET PART (5LBS) 5/15 - 11 $168.00   Call
96 LIN-151A7931P4 Brake Lining and Support Plate Assembly for a GE 16 Inch IC9528A104 Brake. Lining includes bonded metal backing plate. Scan-Pac Premium Non-Asbestos RF-38 lining material MSD sheets included ISG HENN 1018894 CAT 6265 (7LBS) - 4 $188.00   Call
97 LIN-151A7931P5 Brake Lining and Support Plate Assembly for a GE 19 Inch IC9528 Brake. Lining includes bonded metal backing plate. Scan-Pac Premium Non-Asbestos RF-38 lining material. Non-OEM. MSD sheets included 2006 (12LBS) 9/7 - 2 $248.00   Call
98 LIN-164-6441-RF-38 Brake Lining Part 164-6441-RF-38 Scan-Pac Lining Material RF-38 Premium Non-Asbestos Material 16 Inch Diameter 6.50 Inches Wide 13.25 Inches Long across the back of lining 0.375 Inches Thick 2 Linings required per Brake, sold each Color Light Green C-H 16CD1000 (6LBS) H 8" L 16" W 8" Box - 4 $108.72   Call
99 LIN-164-6454D-RF-38 Brake Lining Scan-Pac Lining Material 16" Part 164-6454D-RF-38 RF-38 Premium Non-Asbestos Material For a 16 Inch Diameter Brake TM-1665 Gemco / Westinghouse 0.375 Inch Thick 6.50 Inches Wide 10.25 Inches Long across the back D = Drilled & Countersunk Holes for Rivets which are not included 2 Linings required per Brake, sold each Color Light Green (6LBS) H 5" L 14" W 8" - 6 $93.18   Call
100 LIN-164-7042-RF-38 Brake Lining Scan-Pac Lining Material 16" Part 164-7042-RF-38 Gemco / Westinghouse RF-38 Premium Non-Asbestos Material 0.375 Inch Thick 7.00 Inches Wide 13.00 Inches Long across the back 2 Linings required per Brake, sold each Color Light Green (6LBS) H 8.00" L 18.00" W 16.00" [Amazon] 2 $128.57   Call
101 LIN-166-6416D-RF-38 Brake Lining Scan-Pac Lining Material 16" Part 166-6416D-RF-38 ECM SQD RF-38 Premium Non-Asbestos Material 0.625 Inch Thick 6.50 Inches Wide 6.75 Inches Long across the back 6 Drilled & Countersunk Holes for Fasteners which are not included 2 Linings required per Brake, sold each Color Light Green (6LBS) H 8" L 16" W 16" [Amazon] 4 $120.00   Call
102 LIN-166-6456D-RF-38 Brake lining - Drum OD: 16", Material: RF-38, Thickness: 9/16", Width: 6 1/2", Length: 10.719", Drilled Holes: 8. Non-OEM replacement part 7/7 - 6 $74.70   Call
103 LIN-166-6456-RF-38 Brake Lining Scan-Pac Lining Material 16" Part 165-6456-RF-38 ECM SQD Class 5010 RF-38 Premium Non-Asbestos Material 0.563 Inch Thick 6.50 Inches Wide 10.63 Inches Long across the back 2 Linings required per Brake, sold each Color Light Green (6LBS) H 8.00" L 18.00" W 16.00" [Amazon] 8 $85.66   Call
104 LIN-187-8038D-RF-34 Brake Lining Scan-Pac Lining Material 18" Part 187-8038D-RF-34 For a Gemco / Wagner 18 Inch Diameter Hydraulic Brake RF-34 Premium Non-Asbestos Material 3/4 Inch Thick 8 Inches Wide 15 Inches Long across the back Qty. 14, Drilled & Countersunk Holes For Brass Fasteners which are not included 2 Linings required per Brake, sold each Color Light Green (6LBS) H 800" L 18.00" W 18.00" - 12 $105.66   Call
105 LIN-187-8038D-RF-38 Brake Lining Scan-Pac Lining Material 18" Part 187-8038D-RF-38 For a Gemco / Wagner 18 Inch Diameter Hydraulic Brake RF-38 Premium Non-Asbestos Material 3/4 Inch Thick 8 Inches Wide 15 Inches Long across the back Qty. 14, Drilled & Countersunk Holes For Brass Fasteners which are not included 2 Linings required per Brake, sold each Color Light Green (6LBS) H 800" L 18.00" W 18.00" - 14 $121.20   Call
106 LIN-187-8038-RF-38 Brake Lining Scan-Pac Lining Material 18" Part 187-8038-RF-38 For a Gemco / Wagner 18 Inch Diameter Hydraulic Brake RF-38 Premium Non-Asbestos Material 3/4 Inch Thick 8 Inches Wide 15 Inches Long across the back 2 Linings required per Brake, sold each Color Light Green (6LBS) H 8.00" L 18.00" W 18.00" [Amazon] 4 $105.66   Call
107 LIN-190220140 Scan-Pac RF38 Brake Pad, 0.875 Inch Thick +000 / -0.030 X 5.63 Inches Wide X 10.69 Inches Long + / - 0.03 3/14 - 8 $68.00   Call
108 LIN-194-8438-RF-38 Brake Lining 19 Part LIN-194-8438-RF-38 Scan-Pac Brake Lining Material Premium Non-Asbestos Material For a C-H 19 Inch GH505 Brake 19 Inch Diameter 0.375 Inch Thick 8.50 Inch Wide / Face Width 15.50 Inch Long, measured across the back Undrilled, Does not have 24 Holes Dated 8/17 (12LBS) H 10" L 18" W 10" Box - 1 $108.90   Call
109 LIN-195-8438D-RF-38 Brake Lining 19 Inch Part LIN-195-8438D-RF-38 19 Inch Diameter For P&H / Harnischfeger Material: RF-38 0.50 Inch Thick 15.5 Inches Long 8.50 Inches Wide 14 Drilled & Countersunk Holes Dated 5/17 [Amazon] (3LBS) H 6" L 18" W 10" Box 2 $113.79   Call
110 LIN-195-8447D-RF-38 Brake Lining 19 Inch Gemco TM-1985 19 Inch Diameter RF-38 Premium Non -Asbestos Material 1/2 Inch Thick 8 1/2 Inches Wide 12 3/16 Inches Long Across the Back Drilled & Countersunk for Rivets MSD Sheets Included aka Westinghouse TM-1985, E019065, 861C691G20 Also available undrilled for bonded brake shoes - 6 $136.05   Call
111 LIN-196-8441D-RF-38 Brake Lining Material Part LIN-196-8441D-RF-38 For a Clark 19 Inch Series 106 Type B DC Brake 2 Pieces per Brake Shoe, 4 per brake Premium RF-28 Scan Pak Non-Asbestos Material 19 Inch Diameter 0.625 Inches Thick 8.5 Inches Wide 7.5876 Long Arc With 9 Drilled & Countersunk Holes 10-12 10-16 10-18 Rivet Size Dated 1/18 - 4 $110.12   Call
112 LIN-196-8444D-RF-38 Brake Lining, RF38 Material, Diameter 19 Inch, Thickness, 5/8 Inch, Width, 8 & 1/2 Inch, Length, 7 & 7/8 Inch with 9 Drilled Holes, 51001-071-54, 2 pieces per brake shoe, 4 per brake, sold per piece 7/9 - 6 $79.31   Call
113 LIN-236-8027D-RF-38 Brake Lining Square-D Size 40 RF-38 Premium non-Asbestos Material 23 Inch Diameter 0.625 Inches Thick 11 Inches Wide 9.50 Inches Long 10 Drilled & countersunk Holes A Non-OEM, After-Market Part 4/14 (3LBS) H 6" L 14" W 10" Box [Amazon] 8 $126.66   Call
114 LIN-277A8107P3 General Electric Brake Lining Part 277A8107-P3 aka 277A8107P Brake Lining with Bonded Metal Backing Plate For a 13 Inch IC9528 DC Brake Long Arc Brake Shoe / E100 Dated 12/13 1 $235.71   Call
115 LIN-305A4800P1 Brake Lining Part 305A4800P1 Brake Lining with Bonded Metal Mounting Plate For mechanically / bolted on re-lining of Brake Shoes For an 8 Inch IC9528 DC Brake Model IC9528100 Premium Non-Asbestos Material 2 per brake, sold each aka Old Part 151A7931P1 Dated 1/18 [Amazon] (3LBS) H 4 L 6" W 4" Box 10 $175.00   Call
116 LIN-305A4800P2 Brake Lining and Support Plate Assembly Part 305A4800P2 aka 151A7931P2 For a 10 Inch IC9528101 Brake Lining includes the bonded metal backing plate that facilitates the attachment to the brake shoe Scan-Pac Premium Non-Asbestos RF-38 lining material MSDS will be included aka 151A7931P2 This is a NON-OEM AFTER0MARKET PART (5LBS) 5/15 4 $191.00   Call
117 LIN-305A4800P3 Brake Lining and Support Plate Assembly Part 305A4800P3 aka 151A7931P3 For a 13 Inch IC9528102 Brake Lining includes the Bonded Metal Backing Plate Which then mechanically attaches to the brake shoe Scan-Pac Premium Non-Asbestos RF-38 Lining Material MSDS are available [Ships from Stock to 10 Days] [Updated 2-19] (6LBS) H 6" L 12" W 6" Box - 6 $270.00   Call
118 LIN-305A4800P4 Brake Lining and Support Plate Assembly Part LIN-305A4800P4 For a 16 Inch IC9528103 Brake Lining includes the Bonded Metal Backing Plate Which then mechanically attaches to the brake shoe Scan-Pac Premium Non-Asbestos RF-38 Lining Material MSDS will be included Dated 12/17 aka Old Part 151A7931P4 This is a NON-OEM AFTER0MARKET PART (10LBS) H 8" L 14" W 8" Box - 2 $292.00   Call
119 LIN-305A4800P5 Brake Lining and Support Plate Assembly Part LIN-305A4800P5 For a 19 Inch IC9528104 Brake Lining includes the Bonded Metal Backing Plate Which then mechanically attaches to the brake shoe Scan-Pac Premium Non-Asbestos RF-38 Lining Material MSDS will be included Dated 12/17 aka Old Part 151A7931P5 This is a NON-OEM AFTER0MARKET PART [Amazon] (16LBS) H 10" L 18" W 10" Box 2 $381.88   Call
120 LIN-305A4800P6 Brake Lining and Support Plate Assembly Part LIN-305A4800P6 For a 23 Inch IC9528104 Brake Lining includes the Bonded Metal Backing Plate Which then mechanically attaches to the brake shoe Scan-Pac Premium Non-Asbestos RF-38 Lining Material MSDS will be included Dated 12/17 aka Old Part 151A7931P6 This is a NON-OEM AFTER0MARKET PART [Amazon] (20LBS) H 12" L 20" W 12" Box 2 $532.24   Call
121 LIN-306-0142D-RF-38 Brake Lining for a 30 Inch Diameter Gemco / Westinghouse Type TM-3014 Electric Brake. 5/8 Inches Thick X 14 Inches Wide X 12 & 5/16 Inches Long. 16 Drilled & Countersunk Holes per block. 2 Pieces per brake shoe required. RF38 Premium Non-Asbestos Material, MSDS sheets will be provided 1/14 (3LBS) H 6.00" L 14.00" W 10.00" [Amazon] 4 $239.88   Call
122 LIN-306-0142-RF-38 Brake Lining for a 30 Inch Diameter Gemco / Westinghouse Type TM-3014 Electric Brake. 5/8 Inches Thick X 14 Inches Wide X 12 & 5/16 Inches Long. 2 Pieces per brake shoe required. Undrilled RF38 Premium Non-Asbestos Material, MSDS sheets will be provided 4 to 5 Weeks (9LBS) H 6.00" L 14.00" W 10.00" [Amazon] 6 $228.88   Call
123 LIN-WB-210-A Assembled Brake Shoe, W-13004-A, complete with lining for a EC&M / Square D Class 5010 13 Inch Type WB Brake, Folio 5. Non-Aspbestos Lining Material, MSDS sheets supplied, 2 per brake but sold each 4/8 - 2 $534.00   Call
124 REP-100452 H.I. Cap Screw 21401-20200 # 20 AC/DC YLS Type CCG Series B SqD EC&M (1LB) THIS IS A NON-OEM, AFTERMARKET PART - 2 $3.57   Call
125 REP-1004560 Spring Collar on a 19 Inch Class 5010 Type WB Brake W-19045 Non-OEM THIS IS A NON-OEM, AFTERMARKET PART - 2 $56.64   Call
126 REP-100467 Lock Nut W-19080 For a Class 5010 19 Inch Type WB Brake Item 78 12/15 THIS IS A NON-OEM, AFTERMARKET PART - 1 $10.50   Call
127 REP-100534 Pull Rod 61-1006 for a 10 Inch No 505 Series DC Brake, 1 per brake, item # 5 2/12 THIS IS A NON-OEM, AFTERMARKET PART - 2 $192.00   Call
128 REP-100536 Wedge Adjustment Assembly Part 54-2813 54-4020-2 For a 10 Inch GH505 DC Brake Item 7, 1 per brake PUB 17224 THIS IS A NON-OEM, AFTERMARKET PART Ships from Stock to 10 Days Dated 5-16 - 2 $35.00   Call
129 REP-100537 Wedge Part 100537 aka 54-2813 Adjustment Wedge For a 10 Inch GH505 DC Brake Item 8, 1 per brake PUB 17224 THIS IS A NON-OEM, AFTERMARKET PART Ships from Stock to 10 Days Dated 3-9 - 2 $152.00   Call
130 REP-100552 Retainer 55-1650 on a 10 Inch No 505 DC Brake, Item THIS IS A NON-OEM, AFTERMARKET PART (1LB) H 4" L 5" W 4" Box [Amazon] 2 $58.50   Call
131 REP-100553 Lock Bracket Part 100553 aka 79-6783-5 For a 13 Inch GH505 DC Brake Item 27 [Amazon] Dated 2/18 THIS IS A NON-OEM, AFTERMARKET PART (1LBS) H 4" L 5" W 4" Box 4 $9.29   Call
132 REP-100557 Clamp. Brake Shoe Clamp 55-1037 on a Bulletin 505 8, 10 or 13 Inch Brake 3/15 THIS IS A NON-OEM, AFTERMARKET PART - 3 $37.33   Call
133 REP-100561 Locknut 15-680 for a Bulletin 505 13 Inch DC Brake, item 2 5/14 THIS IS A NON-OEM, AFTERMARKET PART - 3 $8.93   Call
134 REP-100562 Washer, 16-1598-2 Spherical Washer for a Bulletin 505 13 Inch DC Brake, item 2 5/14 THIS IS A NON-OEM, AFTERMARKET PART - 4 $37.14   Call
135 REP-100568 Adjusting Wedge 54-2652-2 For a 13 Inch GH505 DC Brake Item 8, 1 per brake THIS IS A NON-OEM, AFTER-MARKET PART - 1 $132.86   Call
136 REP-100569 Armature, Inner 48-602-5 on a No 505 13 Inch DC Brake 5/12 THIS IS A NON-OEM, AFTERMARKET PART - 1 $1,866.00   Call
137 REP-100571 Armature, Outer 48-602-11 on a No 505 13 Inch DC Brake 5/14 THIS IS A NON-OEM, AFTERMARKET PART - 1 $1,896.00   Call
138 REP-100574 Screw. Adjusting Screw Assembly 11-1746-3 on a No 505 13 Inch DC Brake 5/12 THIS IS A NON-OEM, AFTERMARKET PART - 1 $248.00   Call
139 REP-100575 Gland 49-2153-2 for a Bulletin 505 13 Inch DC Brake, item 15 5/12 THIS IS A NON-OEM, AFTERMARKET PART - 2 $77.14   Call
140 REP-100576 Spring, 69-1652 Compression Spring for a Bulletin 505 13 Inch DC Brake, item 16 (8LBS) 8/15 THIS IS A NON-OEM, AFTERMARKET PART - 3 $127.86   Call
141 REP-100580 Felt 32-50-10 on No 505 13 Inch DC, Item 22 5/12 THIS IS A NON-OEM, AFTERMARKET PART - 1 $4.40   Call
142 REP-100583 Retainer 55-1649 on a 13 Inc No 505 DC Brake, Item 26 THIS IS A NON-OEM, AFTERMARKET PART - 4 $44.85   Call
143 REP-100586 Felt, Dacron Felt, 32-467-3 on a No 505 13 Inch DC Brake THIS IS A NON-OEM, AFTERMARKET PART - 1 $3.32   Call
144 REP-100590 Brake Shoe & Lining 13 Inch Part 100590 aka 48-603-7 Brake Shoe & Lining Assembly For a 13 Inch GH505 DC Brake Item 35, 2 per brake, sold each Premium Non-Asbestos Bonded Material THIS IS A NON-OEM, AFTERMARKET PART Dated 2/18 (13LBS) H 6" L 8" W 8" Box - 7 $500.00   Call
145 REP-100591 Nut. Huglock Nut 15-681 on a Bulletin 505 16 Inch DC Brake, item 1 3/8 THIS IS A NON-OEM, AFTERMARKET PART - 1 $9.93   Call
146 REP-100593 Spring, Compression Spring 69-2225 for a Bulletin 505 16 Inch DC Brake, item 3 3/8 THIS IS A NON-OEM, AFTERMARKET PART - 4 $80.36   Call
147 REP-100594 Pin, Spring Pin 13-3186-7 for a 8, 10 or 13 Inch No 505 Brake, Item 4 7/13 THIS IS A NON-OEM, AFTERMARKET PART - 2 $0.71   Call
148 REP-100595 Pull Rod for a Series 505 16 Inch Brake Assembly. 61-912, Item #5, Includes items 3 & 4, Compression Spring & Spring Pin 3/7 THIS IS A NON-OEM, AFTERMARKET PART - 1 $354.29   Call
149 REP-100597 Wedge Adjustment Assembly Part REP-100597 aka 54-4020-8 & 54-4524 For a 16 Inch GH505 DC Brake Item 8, 1 per brake Dated 6/14 THIS IS A NON-OEM, AFTERMARKET PART (3LB) H 4" L 5" W 4" Box - 1 $145.86   Call
150 REP-100598 Wedge Adjustment Assembly Part REP-100598 aka 54-4020-8 & 54-4524 For a 16 Inch GH505 DC Brake Item 8, 1 per brake Dated 6/14 THIS IS A NON-OEM, AFTERMARKET PART (3LB) H 4" L 5" W 4" Box - 2 $145.86   Call
151 REP-100605 Gland 49-2036 on a Bulletin 505 16 Inch DC Brake, item 15 3/8 THIS IS A NON-OEM, AFTERMARKET PART - 1 $70.33   Call
152 REP-100606 Spring. Compression Spring 69-1554 on a Bulletin 505 16 Inch DC Brake, item 16 THIS IS A NON-OEM, AFTERMARKET PART - 1 $192.85   Call
153 REP-100612 Stop Plate 19-1688-5 by .102 Thick on a Bulletin 505 16 Inch DC Brake, item 22 3/8 THIS IS A NON-OEM, AFTERMARKET PART - 4 $76.00   Call
154 REP-100625 Brake Shoe Assembly 16 Inch 48-554-8 For a 16 Inch GH505 DC Brake Premium Bonded Non-Asbestos Lining Material Sold each, 2 per brake, sold each Part REP-100625 THIS IS A NON-OEM, AFTER-MARKET PART (20LBS) 1/17 - 7 $560.00   Call
155 REP-100653 Gasket 32-467-5 9/16 THIS IS A NON-OEM, AFTERMARKET PART - 2 $2.56   Call
156 REP-100658 Brake Shoe Assembly Part 100658 For a 19 Inch GH505 DC Brake Assembly With Premium Bonded Lining Material aka 48-1818-5, 48-611 & 48-611-4 item 35, sold each, 2 per brake THIS IS A NON-OEM, AFTERMARKET PART (18LBS) 4/14 - 5 $564.29   Call
157 REP-100663 Pull Rod 61-1008 For a 23 Inch GH505 DC Brake Item 4, 1 per brake 4/9 THIS IS A NON-OEM, AFTERMARKET PART - 1 $564.29   Call
158 REP-100664 Wedge Adjustment Complete for a 23 Inch Bul 505 Magnetic Brake Assembly, 54-4020-5 11/6 THIS IS A NON-OEM, AFTERMARKET PART - 2 $59.40   Call
159 REP-100689 Clamp, Brake Shoe Clamp Part REP-100689 aka 55-1039 On a 23 Inch GH505 DC Brake Item 32, 4 per brake, sold each THIS IS A NON-OEM, AFTER-MARKET PART 5/17 (1LB) H 4" L 5" W 4" Box - 2 $32.86   Call
160 REP-100692 Brake Shoe & Lining Assembly Part 100692 aka 48-633-4 For a 23 Inch GH505 DC Brake Item 35, 2 per brake, sold each Premium Non-Asbestos Lining Material Bulletin 17228 & 11381 THIS IS A NON-OEM, AFTER-MARKET PART Dated 6/18 (62LBS) - 3 $820.00   Call
161 REP-100702 Nut 915-1443Z Lock Nut 6/15 THIS IS A NON-OEM, AFTERMARKET PART - 2 $2.80   Call
162 REP-100706 Brake Part 503 10 Inch Part 100706 aka 623-134 OBSOLETE from OEM Brake Shoe & Lining Assembly For a 10 Inch 503 Type "M" Brake THIS IS A NON-OEM, AFTERMARKET PART Dated 7/18 (6LBS) H 5" L 12" W 5" Box - 2 $450.00   Call
163 REP-101317 Brake Shoe & Lining Part REP-101317 aka 490362 For a Type DI 135-F Ships in 90 days THIS IS A NON-OEM, AFTERMARKET PART Dated 1/18 - 2 $392.86   Call
164 REP-101380 Bushing. Plunger Guide Bushing on a Westinghouse Type DI 167-F Brake. 575654 Non-OEM THIS IS A NON-OEM, AFTERMARKET PART - 2 $406.00   Call
165 REP-101517 WB-561, Magnet Case Bushing THIS IS A NON-OEM, AFTERMARKET PART - 20 $55.48   Call
166 REP-101522 WB562 Bushing, Armature / Lower THIS IS A NON-OEM, AFTERMARKET PART - 30 $50.48   Call
167 REP-101527 WB-564 Bushing, Shoe Lever THIS IS A NON-OEM, AFTERMARKET PART - 20 $50.48   Call
168 REP-101531 WB-563 Bushing, Shoe Lever THIS IS A NON-OEM, AFTERMARKET PART - 30 $54.51   Call
169 REP-102229 Spring Part REP-102229 aka W-13020 Operating Spring For a 13 Inch Class 5010 Type F Series A DC Brake Dated 1/18 THIS IS A NON-OEM, AFTERMARKET PART - 1 $120.00   Call
170 REP-102275 Spring Rod Complete W-16012-A 3/11 THIS IS A NON-OEM, AFTERMARKET PART - 2 $358.00   Call
171 REP-102283 W-13024 Dust Shield 6/16 THIS IS A NON-OEM, AFTERMARKET PART - 2 $42.14   Call
172 REP-102568 Spring Rod WB-2234-A For a #22 Type WB Brake Folio 1, 13 Inch 8/16 THIS IS A NON-OEM, AFTERMARKET PART - 1 $316.00   Call
173 REP-103609 Brake Part 511 7" 5/16" Thick Steel Washer For a 7 Inch 511 Series Solenoid Brake Part for Item 7, 2 per brake Publication 10522 THIS IS A NON-OEM AFTER-MARKET PART - 4 $2.03   Call
174 REP-105138 Brake Shoe & Lining Assembly 16 Inch 50906-101-50 For a 16 Inch Class 5010 Type F Series A (35LBS) 1/15 THIS IS A NON-OEM, AFTERMARKET PART - 4 $570.00   Call
175 REP-105163 Brake Shoe & Lining 8" 505 48-1267-4 8 Inch Diameter For a GH505 Series DC Brake Premium Bonded Non-Asbestos Lining Material Sold each, 2 per brake (3LBS) THIS IS A NON-OEM, AFTERMARKET PART - 9 $350.00   Call
176 REP-105735 Brake Shoe Assembly Part 105735 aka 48-1268-4 For a 10 Inch GH505 DC Brake Premium Bonded Non-Asbestos Lining 2 per brake, sold each Publication 17224 Dated 2/18 THIS IS A NON-OEM, AFTERMARKET PART (6LBS) H 5" L 8" W 5" Box - 18 $390.00   Call
177 REP-105744 Spring. Compression Spring located on the pull rod of a 23 Inch Series GH505 Brake . 69-1987 Item #2. 1 per brake 1/8 THIS IS A NON-OEM, AFTERMARKET PART - 20 $93.30   Call
178 REP-105924 Brake Shoe Assembly 30 Inch 51007-022-01 for a Class 5010 30 Inch Type WB Folio 6 DC Brake Item 55, 2 per brake, sold each THIS IS A NON-OEM, AFTERMARKET PART - 1 $900.00   Call
179 REP-106068 Latch Pin 50903-407-05 For a Class 5010 23 Inch Type F Series A or B Brake Item #18 THIS IS A NON-OEM, AFTERMARKET PART - 1 $52.86   Call
180 REP-106090 Lining Kit Part REP-106090 aka 50903-808-53 For a 13 Inch Class 5010, Type F, Series A or B, DC Brake Item 35 Series A, 34 Series B, 1 Kit per brake Includes 2 Linings & 16 Rivets THIS IS A NON-OEM, AFTERMARKET PART Dated 1/18 (4LBS) - 3 $176.00   Call
181 REP-106116 Gasket Part 106116 aka 32-467-10 Dated 8/16 (1LBS) H 4" L 5" W 4" Box 2 $2.20   Call
182 REP-106120 Lining Material Part REP-106120 aka 48-1818-5 For a 19 Inch GH505 DC Brake Item 31, 2 per brake, sold each Premium Non-Asbestos Lining Material aka old 48-338-21 & 27-140 THIS IS A NON-OEM, AFTER-MARKET PART - 2 $179.20   Call
183 REP-106133 Wedge Adjustment Screw Assembly Part 106133 NEW STYLE For 8 or 10 Inch GH505 DC Brakes Item 7, 1 per brake Includes item 6 Locknut Publication 17224 THIS IS A NON-OEM, AFTERMARKET PART Ships in 7 to 10 days Dated - 2 $35.71   Call
184 REP-106148 Groove Pin, Push Pin Part REP-106148 aka 13-4762 For attachment of Linings to Brake Shoes Irons [Amazon] Dated 1/18 THIS IS A NON-OEM, AFTERMARKET PART (1LBS) H 4" L 5" W 4" Box 71 $1.84   Call
185 REP-106529 Lining 48-1199-2 for a series 511 Type "S" Solenoid Brake 7 Inch Diameter. Non-Asbestos Material, Price Each, 2 Required per brake, No Fasteners (1LB) 12/14 THIS IS A NON-OEM, AFTERMARKET PART - 4 $68.00   Call
186 REP-106737 Lining Kit 51001-071-51, 4 Lining, 16 Rivets 1/12 THIS IS A NON-OEM, AFTERMARKET PART - 1 $122.00   Call
187 REP-106981 Spring. Main Spring A106-200480 on a 23 Inch DC Brake THIS IS A NON-OEM, AFTERMARKET PART - 5 $260.00   Call
188 REP-107524 Bolt. Hardened Brake Shoe Bolt Assembly E013053 on a TM1355, 2 per brake, sold each, 24D6387G04. Item 16 6/15 THIS IS A NON-OEM, AFTERMARKET PART (2LBS) H 4.00" L 5.00" W 4.00" [Amazon] 2 $93.87   Call
189 REP-107736 Bushing REP-107736 Brass Bushing For a TM-83 & TM-1035 DC Brake 12 per brake, sold each aka 31D4118H04 E008028 Dated 11/17 THIS IS A NON-OEM, AFTERMARKET PART (1LB) H 4" L 5" W 4" Box - 26 $25.00   Call
190 REP-107919 Main Spring Part 107919 aka E019044 Main Spring, Brake Application For a 19 Inch TM-1985 DC Brake, Coil End Item 3, 1 per Brake aka Old West 438A072H05 THIS IS A NON-OEM AFTERMARKET PART Dated 8/18 (9LBS) H 4" L 7" W 4" Box - 2 $219.30   Call
191 REP-107981 Brake Shoe & Lining Part 107981 For a TM-83 or ET-8, 8 Inch Brake 2 per brake, sold each Item 14 Premium Bonded, OEM, Non-Asbestos Material aka 439C314G01 THIS IS A NON-OEM, AFTER-MARKET PART Dated 5/17 (3LBS) H 4" L 8" W 4" Box - 16 $408.50   Call
192 REP-107996 Brake Shoe & Lining Complete for a TM-1985 or ET-19 19 Inch Diameter Electric Brake Assembly Bonded, Premium Non-Asbestos Material Qty. 1, 2 per brake. sold each Item 14 8/18 aka 439C394G01 (45LBS) THIS IS A NON-OEM, AFTERMARKET PART - 4 $804.00   Call
193 REP-108144 Brake Shoe & Lining Assembly Part 108144 For a 10 Inch TM-1035 or ET-10 Brake 2 per brake, sold each Premium Bonded, Non-Asbestos Material aka E010047 & 635C292G01 THIS IS A NON-OEM, AFTERMARKET PART (5LBS) H 4" L 10" W 4" Box - 14 $420.00   Call
194 REP-108145 Brake Shoe & Lining Assembly 10 Inch Part REP-108145 aka E010047 For a 10 Inch TM-1035 DC Brake THIS IS A NON-OEM, AFTERMARKET PART (5LBS) H 4" L 10" W 4" Box - 11 $420.00   Call
195 REP-108185 Brake Shoe & Lining Assembly Part REP-108185 For a 6 Inch TM-63, ET6 or ET6NA Electric Brake Bonded Premium Non-Asbestos Lining Material Sold each, 2 per Brake 70 Degree Arc aka E006023 & 645C162G02 THIS IS A NON-OEM, AFTERMARKET PART (2LBS) H 4" L 5" W 4" Box - 8 $330.00   Call
196 REP-108271 Spring. Connecting Rod Spring 50901-010-08 For a 13 Inch Class 5010 Type F Series A DC Brake 6/16 THIS IS A NON-OEM, AFTERMARKET PART - 1 $25.00   Call
197 REP-108295 Spring Part 108295 aka 50901-003-03 Extension Spring For a 13 Inch Class 5010 Type F Series A DC Item 76, 1 per brake Ships from stock THIS IS A NON-OEM, AFTERMARKET PART (1LBS) H 4" L 5" W 4" Box 4 $46.67   Call
198 REP-108320 Brake Shoe Assembly 10 Inch 50904-101-50 For a Class 5010 10 Inch Type F Series A or B Brake 5/13 THIS IS A NON-OEM, AFTERMARKET PART - 6 $370.00   Call
199 REP-108321 Brake Lining Kit Part 108321 aka 50903-808-52 For a 10 Inch 5010 Type F Series A or B Brake 2 Pieces of Brake Lining Material THIS IS A NON-OEM, AFTERMARKET PART [Amazon] Dated (3LBS) H 8" L 9" W 8" Box 2 $120.00   Call
200 REP-108358 Brake Lining Kit Completes 2 Brake Shoes on 1 Brake 50903-808-54 For a 16 Inch Class 5010, Type F, Series B Brake Premium Non-Asbestos Lining Material & Fasteners 1 Week to ship THIS IS A NON-OEM, AFTER-MARKET PART 4/17 - 1 $280.00   Call
201 REP-108360 Elastic Stop Nut Assembly 50903-411-52 Class 5010 16 Inch Type F Series A 10/8 THIS IS A NON-OEM, AFTERMARKET PART - 3 $98.00   Call
202 REP-108385 Connecting Rod Assembly Part 108385 aka 50903-117-50 For a Class 5010 8 Inch Type F Series A Brake Item 23, 1 per brake Includes Bushings Item 14 THIS IS A NON-OEM, AFTERMARKET PART Dated 3-19 (6LBS) H 5" L 27" W 6" Box 1 $217.16   Call
203 REP-108386 Operating Spring Part 108386 aka 50901-010-12 For a Class 5010 8 Inch Type F Series A Brake Item 25 THIS IS A NON-OEM, AFTERMARKET PART Dated 2/18 - 4 $77.91   Call
204 REP-108389 Spring, Connecting Rod Spring Part 108389 aka 50901-010-11 For a Class 5010 8 Inch Type F Series A Brake Item 31, 1 per Brake THIS IS A NON-OEM, AFTERMARKET PART Dated 3-19 (1LB) H 5" L 5" W 5" Box 4 $147.28   Call
205 REP-108393 Lining Kit Part 108393 aka 50903-808-51 For an 8 Inch Class 5010 Type F Series A Brake Includes Linings & Rivets for 2 Brake Shoes Item 37 THIS IS A NON-OEM, AFTERMARKET PART Dated (3LBS) - 1 $68.57   Call
206 REP-108406 Ratchet Rod 50903-160-01 on a Class 5010 8 Inch Type F Series A Brake, item 72, 1 per brake 4/12 THIS IS A NON-OEM, AFTERMARKET PART - 1 $220.00   Call
207 REP-108424 Cover. Magnet Case Cover Assembly 50907-143-50 THIS IS A NON-OEM, AFTERMARKET PART - 1 $569.33   Call
208 REP-108550 Coil 9-941-15 for a 7 Inch 511S, 7 Inch 50 FT LB Brake. 240 Volt AC 3/15 THIS IS A NON-OEM, AFTERMARKET PART - 1 $340.00   Call
209 REP-109209 Coil Part REP-109209 aka 1D181G1A 1D181G001 F1D181G1A Shunt Wound Brake Coil For a 23 Inch IC9528 DC Brake Dated 2/18 Ships in 21 days THIS IS A NON-OEM, AFTERMARKET PART - 1 $5,800.00   Call
210 REP-109655 Screw Self Locking Screw 11-3046-3 8/16 THIS IS A NON-OEM, AFTERMARKET PART - 2 $4.20   Call
211 REP-109751 Retro Fit Kit Part 109751 aka 99-2059-2 For a 19 Inch Bul 505 Magnetic Brake Assembly THIS IS A NON-OEM, AFTERMARKET PART Dated 7/18 - 1 $196.00   Call
212 REP-111394 Retro Fit Kit Part 111394 aka 99-2059-3 For a 23 Inch GH505 DC Brake Item 19, 1 per brake THIS IS A NON-OEM, AFTER-MARKET PART [Amazon] (3LBS) H 4" L 6" W 6" Box 6 $185.71   Call
213 REP-111627 Coil. E010049 Shunt Wound Coil for a TM-1035 10 Inch DC Brake 2/14 THIS IS A NON-OEM, AFTERMARKET PART - 2 $1,670.00   Call
214 REP-111629 Coil. Shunt Wound Coil for a TM-63 Brake Assembly. Intermittent Duty, 1 Hour Cycle 80 Volts DC / 1.35 AMPS. Continuous Duty, 8 Hour Cycle 64 Volts DC / 1.08 AMPS. Average Cold Coil Resistance 59.4 OHMS. Ref # 26 1 coil per brake 645C173G16 Resistors are required in series E006024 / Forcing E006025 (16LBS) THIS IS A NON-OEM, AFTERMARKET PART - 1 $1,290.00   Call
215 REP-111681 Contact Arm Support 51017-230-01 THIS IS A NON-OEM, AFTERMARKET PART - 4 $87.36   Call
216 REP-111757 Retro Fit Kit Part 99-2058-3 For a 13 Inch No 505 Brake Assembly Kit includes 2 Angle Brackets & Hardware Complete Kit for One Brake THIS IS A NON-OEM, AFTER-MARKET PART - 14 $124.29   Call
217 REP-112206 Spring 50502-602-42 THIS IS A NON-OEM, AFTERMARKET PART - 12 $4.57   Call
218 REP-112227 Auxiliary Arm 112227 THIS IS A NON-OEM, AFTERMARKET PART - 6 $53.04   Call
219 REP-112267 Armature Plate 51017-234-01 THIS IS A NON-OEM, AFTERMARKET PART - 14 $26.00   Call
220 REP-112325 Brake Coil Part 112325 aka 9-941-12 For a 7 Inch, Bulletin 511 "S" Solenoid Brake 460 Volt AC 60 Hz 50 FT LB Continuous / 75 FT LB Intermittent NOT 85 / 110 FT LB Brake Suffix -41 Publication 15475 Dated 8/18 THIS IS A NON-OEM, AFTERMARKET PART (3LBS) H 4" L 5" W 4" Box - 3 $502.00   Call
221 REP-112342 Bolt. 911-6016Z Hex Head Bolt 6/15 THIS IS A NON-OEM, AFTERMARKET PART - 2 $35.20   Call
222 REP-112397 Retro Fit Kit / Bracket, frame to coil, 79-15572-3 on a 16 Inch No 505 DC Brake. Item 20, 2 per brake, 99-2059 THIS IS A NON-OEM, AFTERMARKET PART - 3 $132.86   Call
223 REP-112413 Blowout Core 51066-014-01 # 20 AC/DC YLS Type CCG Series B (1LB) THIS IS A NON-OEM, AFTERMARKET PART - 2 $68.20   Call
224 REP-112437 GH505 Brake Part 10 Inch Retro Fit Kit Part REP-112437 aka 99-2058-2 For a 10 Inch GH505 DC Brake Includes: 2 Angle Brackets 79-15572-6 8 Bolts 4 Bushings & Lock Washers Dated 5/12 THIS IS A NON-OEM, AFTERMARKET PART - 4 $123.57   Call
225 REP-112438 Retro-Fit Kit 99-2058 for a No 505 8 Inch DC Brake, Item 20 THIS IS A NON-OEM, AFTERMARKET PART - 2 $118.00   Call
226 REP-112631 pacer REP-112631 Spacer Dated 1/18 Ships in 7 days or less aka 29-5535-4 - 8 $35.71   Call
227 REP-112953 Coil 9-580-4 Brake Coil THIS IS A NON-OEM, AFTERMARKET PART - 1 $320.00   Call
228 REP-112970 Coil Part PEP-112970 aka 9-591-10 240 Volt AC @ 60 Hz 220 Volt AC @ 50 Hz For a 4 Inch Series 511 Type "S" Solenoid Brake Dated 11/17 THIS IS A NON-OEM, AFTERMARKET PART - 3 $398.40   Call
229 REP-113097 Adjusting Screw Assembly 11-1865 For a GH505 30 Inch Brake Item 15, 2 per brake, sold each Obsolete by OEM 5/16 THIS IS A NON-OEM, AFTERMARKET PART - 4 $605.71   Call
230 REP-113300 Brake Coil Part 113300 Shunt Wound DC Brake Coil For a TM-1665 Brake Assembly 32 Volts per coil continuous duty 40 Volts per coil intermittent duty average resistance 8.8 Ohms Item 26, 2 per brake, cost each Coils are connected in series Ref # 26 635C247G17 E016026 THIS IS A NON-OEM, AFTERMARKET PART Ships in 30 days Dated 2/18 - 2 $1,690.00   Call
231 REP-113331 Coil Part REP-113331 Shunt Wound Brake Coil For a 23 Inch TM-2311 DC Brake Item 26, 2 per brake, sold each 32 Volts per coil continuous duty 40 Volts per coil intermittent duty Average resistance 6.1 OHMS Coils are connected in series aka 637C373G16 & E023026 Dated 11/17 (180LBS) Motor Freight Only THIS IS A NON-OEM, AFTERMARKET PART - 2 $4,200.00   Call
232 REP-113458 Lining Kit aka 6-166 - 2 $170.00   Call
233 REP-113459 Brake Lining Kit Part 113459 aka 6-166-2 Brake Lining Kit For a 5 & 1/2 Inch Series 511 Brake Item 32, 1 per brake Includes items: 26 Lining 27 Groove Pins Publication 17377 [Ships from Stock to 2 Weeks] {Updated 1-19] - 3 $189.20   Call
234 REP-113460 Lining Kit 6-166-3 for a 7 Inch Series 511 Type "S" Solenoid Brake. Contains 2 linings and fasteners for 2 brake shoes 12/12 THIS IS A NON-OEM, AFTERMARKET PART - 4 $132.00   Call
235 REP-113462 Brake Shoe Assembly REP-113462 aka 48-306 For a 4 Inch Series 511 Type S Brake 2 required, sold each Premium Non-Asbestos Lining Material Groove Pin / Riveted Linings Welded Pin Type / Older Style Bulletin 11326, 19320 & 13864 DC 10, 15 & 20 FT LB Brakes Dated 1/18 THIS IS A NON-OEM, AFTER-MARKET PART - 2 $370.00   Call
236 REP-113591 Coil 460 Volt 7 Inch Part REP-113591 For a 7 Inch, 511 Type "S" Brake 460 Volt 85 / 110 FT LB Brake Suffix -41 Size "D" THIS IS A NON-OEM, AFTERMARKET PART Dated 3/18 - 1 $366.00   Call
237 REP-113671 Arc Chute 51017-217-50 THIS IS A NON-OEM, AFTERMARKET PART - 4 $225.71   Call
238 REP-113672 Blow Out Coil Assembly 51017-205-50 THIS IS A NON-OEM, AFTERMARKET PART - 4 $170.36   Call
239 REP-113673 Blowout Coil Guard 51017-237-01 THIS IS A NON-OEM, AFTERMARKET PART - 6 $16.00   Call
240 REP-113678 Auxiliary Arm Spring Retainer 5107-239-01 THIS IS A NON-OEM, AFTERMARKET PART - 12 $7.14   Call
241 REP-113679 Contact Arm 51017-214-50 THIS IS A NON-OEM, AFTERMARKET PART - 6 $72.11   Call
242 REP-113680 Contact Arm Pin 51019-251-04 THIS IS A NON-OEM, AFTERMARKET PART - 8 $5.69   Call
243 REP-113682 Bearing 29005-20160 3/14 THIS IS A NON-OEM, AFTERMARKET PART - 20 $4.20   Call
244 REP-113686 Stop Bracket 51017-243-50 THIS IS A NON-OEM, AFTERMARKET PART - 8 $11.70   Call
245 REP-113687 Connector 51017-204-50 THIS IS A NON-OEM, AFTERMARKET PART - 6 $28.73   Call
246 REP-113850 Brake Coil Part 113850 aka 9-585-5 440 Volt AC 60 Hz 380 Volt AC 50 Hz For a 5.5 Inch 25 or 35 FT LB Brake Used with Solenoid 88-2930-4 Or 7 Inch Brake 50 & 75 FT LB Brake Used with Solenoid 88-1342-11 Brake Suffix -7 Ships in 21 days THIS IS A NON-OEM BRAKE PART Dated 8/18 - 2 $337.00   Call
247 REP-114665 Brake Shoe Assembly Part 114665 aka J007844 Brake Shoe Assembly with Bolted Linings Dated 12/18 - 2 $420.00   Call
248 REP-115144 Brake Shoe & Lining Part REP-115144 aka 48-103-3 For an 7 Inch 511 Solenoid Brake Item # 25, 2 per brake sold each Older Style with Welded Pins Publication 10522 THIS IS A NON-OEM, AFTERMARKET PART (6LBS) Dated 10/17 - 2 $460.00   Call
249 REP-116109 Brake Coil Part 116109 aka 9-758-20 Solenoid Brake Coil For 10 Inch 511 "S" Brake 80 Volt 160 FT LB THIS IS A NON-OEM, AFTERMARKET PART 12/13 - 1 $1,157.00   Call
250 REP-116665 Lining Kit Part 116665 aka 6-166-5 For a 7 Inch 511, Type "S " Solenoid Brake Includes 2, Drilled & Countersunk Non-Asbestos Linings Fasteners / Brass Push Pins THIS IS A NON-OEM, AFTERMARKET PART [Amazon] (3LBS) H 5" L 5" W 6" Box 12 $154.17   Call
251 REP-116792 Lining Kit Part REP-116792 For a 4 Inch 511 Type S Brake Material required for 2 brake Shoes aka 48-80-2 48-80 Dated 11/17 THIS IS A NON-OEM, AFTERMARKET PART (2LBS) H 6" L 6" W 6" Box - 12 $76.00   Call
252 REP-116793 Lining Kit Part REP-116793 For a 4 Inch 511 Type S Brake Material required for 2 brake Shoes aka 48-80-2 48-80 Dated 11/17 THIS IS A NON-OEM, AFTERMARKET PART (2LBS) H 6" L 6" W 6" Box - 7 $76.00   Call
253 REP-117017 Spring Part 117017 aka 69-296 Solenoid Spring For a 7 Inch Series 511 Solenoid Brake Item 10, 1 per brake Publication 15475 [Amazon] THIS IS A NON-OEM, AFTER-MARKET PART (1LBS) H 4" L 5" W 4" Box 4 $33.11   Call
254 REP-117139 Brake Shoe & Lining Part 117139 aka 48-1787 For a 5 & 1/2 Inch Series 511 Brake Newer Style with Screwed not Welded Top Connection Studs Item 24, 2 per brake, sold each Publication 17377 Dated 1/18 THIS IS A NON-OEM, AFTERMARKET PART - 2 $380.00   Call
255 REP-117160 Washer Part 117160 aka 16-254 Solenoid Washer For a 5 & 1/2 & 7 Inch Series 511 Solenoid Brake Item 31 Publication 17377 Sold each, 2 per brake Dated 8/14 (1LBS) H 4" L 6" W 4" Box 8 $6.50   Call
256 REP-117161 Spring Leaf Spring Part REP-117161 aka 69-273 For a 7 Inch Diameter Series 511 Type "S" Brake Publication 15475 Item 5, 2 per brake sold each (1LBS) H 5.00" L 5.00" W 5.00" THIS IS A NON-OEM, AFTERMARKET PART - 50 $17.86   Call
257 REP-117170 Sleeve 18-615-15 Neoprene Bearing / Sleeve For a 7 Inch Series 511 Type "S" Solenoid Brake Item 12, 1 per brake Publication 15475 12/14 THIS IS A NON-OEM, AFTERMARKET PART - 4 $14.40   Call
258 REP-117171 Spacer 29-1440-2 on a 7 Inch 511 Series Solenoid Brake. Item 13, 2 per brake. Pub 15475 12/14 THIS IS A NON-OEM, AFTERMARKET PART - 8 $31.60   Call
259 REP-117172 Pin 13-317-10 For a 7 Inch 511 Series Solenoid Brake Connects Solenoid Link to the Lever Arm Item 14, 1 per brake Pub 15475 10522 15477 THIS IS A NON-OEM, AFTERMARKET PART - 4 $50.00   Call
260 REP-117184 Spring Main Torque Spring 69-761 For a 75 FT LB 7 Inch Series 511 Brake THIS IS A NON-OEM, AFTER-MARKET PART 9/13 - 1 $90.00   Call
261 REP-117189 Base 17-515 for a Series 511 7 Inch Brake THIS IS A NON-OEM, AFTERMARKET PART - 2 $601.43   Call
262 REP-117193 Brake Coil 460 Volt 4 Inch 511 Part 117193 aka 9-591-11 For a 4 Inch, Bulletin 511 Type "S" Solenoid Operated Brake 460 - 480 Volt Coil Suffix -41 Publication 19320 THIS IS A NON-OEM, AFTERMARKET PART Dated 8/18 (2LBS) - 3 $365.50   Call
263 REP-117204 Brake Lining Type S 5 & 1/2 Inch Diameter 48-338-2 THIS IS A NON-OEM, AFTERMARKET PART - 6 $64.00   Call
264 REP-118141 Brake Coil 4 Inch 460 Volt Part 118141 9-580-5 For a 7 Inch, Bulletin 511 Type "S" Solenoid Operated Brake 240 Volt AC 85 / 110 FT LB THIS IS A NON-OEM, AFTERMARKET PART (1LB) H 4" L 5" W 4" Box - 2 $264.00   Call
265 REP-118146 Coil, Brake Coil 7 Inch 240 Volt Part REP-118146 9-941-4 For a 7 Inch, Bulletin 511 Type "S" Solenoid Operated Brake 240 Volt AC 85 / 110 FT LB Brake Suffix 40 Size "D" (1LBS) H 4.00" L 5.00" W 4.00" THIS IS A NON-OEM, AFTERMARKET PART - 2 $300.00   Call
266 REP-119099 Brake Shoe & Lining Assembly Part 119099 aka 48-98-3 For a 5.5 Inch 511 Solenoid Brake Assembly Older Style with Welded Shoe Pins Qty. 1, 2 per brake Item 22 Publication 10824 & 13840 Dated 1/8 [Amazon] THIS IS A NON-OEM, AFTERMARKET PART (1LBS) H 3" L 8" W 3" Box 5 $380.00   Call
267 REP-119275 Plunger Guide - 2 $176.00   Call
268 REP-119292 Link Plunger & Lever Link For a 7 Inch Series 511 Type "S" Brake Item 10, 1 per brake 12/14 (1LB) H 4" L 6" W 6" Box THIS IS A NON-OEM, AFTERMARKET PART - 4 $210.00   Call
269 REP-119820 Coil Part REP-119820 Brake Coil aka 9-941-8 120 Volt, 60 Hz Coil For a 7 Inch 511 Solenoid Brake 85 & 110 FT LBS Dated 9/17 (2LB) H 4" L 5" W 4" Box - 2 $440.00   Call
270 REP-119978 Spring 69-4575 Solenoid Spring on a Bull 511 Type "S" 5 & 1/2 Inch Brake. Item # 13, 1 per brake (<1LB) 5.14 THIS IS A NON-OEM, AFTERMARKET PART - 1 $27.00   Call
271 REP-120096 Bracket 79-672 on a 4 Inch Series 511 Type "S" Solenoid Brake, Item 6, 1 per brake PUB 19320 & 11326 6/15 THIS IS A NON-OEM, AFTERMARKET PART - 1 $52.00   Call
272 REP-120097 Spring 69-4908 Vertical Spring For a 4 Inch 511 Series AC or DC Brake aka 69-578 & 69-702 Publication 19320 THIS IS A NON-OEM, AFTERMARKET PART - 2 $48.13   Call
273 REP-120373 Coil 9-591-12 600 Volt 4 Inch For a 4 Inch, Bulletin 511 Type "S" Solenoid Operated Brake 600 Volt @ 60 Hz 550 Volt @ 50 Hz Brake Suffix 58 Brake Suffix 9 & 71 (2LBS) 12/15 THIS IS A NON-OEM, AFTERMARKET PART - 1 $450.00   Call
274 REP-120465 Brake Shoe Assembly 511 4 Inch Part 120465 aka 48-306-3 or 48-306 4 Inch Brake Shoes Assembly For a Type S Series 511H Solenoid Brake 10 or 15 FT LB Item 16, 2 per brake, sold each Publication 19320, & 11326 Newer Style with removable top pin Item # 16, 2 per brake sold each [Updated 10-15] THIS IS A NON-OEM, AFTERMARKET PART - 4 $380.00   Call
275 REP-120877 Coil Part REP-120877 Brake Coil 208 Volt AC 60 Hz 5.5 Inch 511 Solenoid Brake 25 FT LB Brake Suffice 45 aka 9-585-33 Dated 5/17 THIS IS A NON-OEM, AFTER-MARKET PART (2LBS) H 4" L 5" W 4" Box - 1 $360.00   Call
276 REP-120890 Brake Coil Part REP-120890 aka 9-585-10 For a 5.5 Inch Series 511 Solenoid Brake 240 Volt AC 60 Hz 220 Volt AC 50 Hz Brake Coil Suffix -67, Size "D" THIS IS A NON-OEM, AFTERMARKET PART Dated (2LBS) H 4" L 5" W 4" Box - 3 $440.00   Call
277 REP-49-3917 Spring Gland THIS IS A NON-OEM, AFTERMARKET PART - 49 $46.67   Call
278 REP-B50903-401-13 Armature Pin for a 30" Type F-30 Series A Brake THIS IS A NON-OEM, AFTERMARKET PART - 1 $116.07   Call
279 REP-B50903-401-20 Pin for connecting rod and inner lever (3 required per brake, sold each) for a 30" Type F-30, Series A Brake THIS IS A NON-OEM, AFTERMARKET PART - 3 $119.94   Call
280 REP-B50903-401-21 Outer and support lever pin for 30" Type F-30, Series A Brake. (2 required per brake, sold each) THIS IS A NON-OEM, AFTERMARKET PART - 2 $184.23   Call
281 REP-KP3003025AL Brake Shoe Assembly 623-167 30 Inch Type 503 Aluminum Shoe Premium Non-Asbestos Lining Material ArcelorMittal CMY000480 THIS IS A NON-OEM, AFTERMARKET PART - 4 $4,980.00   Call
282 REP-PINS Pins for bottom shoe lever THIS IS A NON-OEM, AFTERMARKET PART - 2 $54.07   Call
283 REU-OLDA-C16N25-B720 Reuland Brake Model OLDA-C16N25-B720, 6 FT LB, 575 Volt, Hub Bored @ 7/8 Inch with a 3/16 Inch Keyway. 31B4 Stator - 1 $753.17   Call
284 WAG-3023 Wagner Cup Part F3023 7/8 / 0.875 Inch Diameter 11/32 Inch High EIS R31 / R37 120 USA aka FD-118163 F3023 (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 36 $12.50   Call
285 WAG-5343 Wagner Bleeder Hose Part 5343 Only uninstalled parts can be returned Normally a Stock Item, PA Dated 12/18 (1LBS) H 3" L 9" W 7" Box - 2 $7.15   Call
286 WAG-610 Wagner Grease Fitting 1/8 Inch Large Straight Pipe Thread With a Ball Check Valve Plated Finish Normally a Stock Item - 50 $0.95   Call
287 WAG-70494KIT Wagner Repair Kit (2LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $255.90   Call
288 WAG-A075422 Wagner Repair Kit For a J98275 Disc Brake Power Cluster 1 X 8 Pressure Ratio 5 Inch Diameter Pneumatic Bore Side 1.75 Inch Diameter Hydraulic Bore 10 Parts Included Air Piston Cup AD-2955 1x3 & Felt Washer A2836 for the Pneumatic Side Secondary Seals, Main Piston, Secondary Piston, Compensating Check Valve, Back-Up Washer, Primary Cup, Spring Clip & a Zero Residual Check Valve for the Hydraulic Side SAE 1703 / DOT 3 Brake Fluid Only Normally a Stock Item - 5 $618.95   Call
289 WAG-A075431 Wagner Repair Kit Part A075431 For a J98274 Disc Brake Power Cluster 1 X 15 Ratio Pressure Ratio 7 Inch Diameter Pneumatic Bore 1.75 Inch Diameter Hydraulic Bore Includes 11 Parts: Air Piston Cup AD-2918 Felt Washer on the Pneumatic Side Secondary Seals Main Piston Secondary Piston Compensating Check Valve Back-Up Washer Primary Cup FC-89534 Zero Residual Check Valve on the Hydraulic Side Boot AC-2034 Spring Clip For use with Dot 3 Brake Fluid Only, SAE 1703 aka A75431 & AC75431 (2LBS) H 3" L 9" W 7" Box [Checked 12/2018] - 3 $533.00   Call
290 WAG-A131023KIT Wagner Repair Kit For Pressure Cluster A131023 Parts included to repair both the pneumatic & hydraulic sides (2LBS) H 3" L 9" W 7" Box [Checked 12/2018] 4 $177.39   Call
291 WAG-A2196 Wagner O'Ring Part A2196 2.75 Inch O.D. 2.375 Inch I.D. 0.25 Thick (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 7 $14.60   Call
292 WAG-A3074 Wagner Repair Kit Part A3074 Casting FD4570 For a Power Cluster A837- Air/Hydraulic Side Repairs Master Cylinder F4572 & AAF833 / A833 AD833 Pneumatic Cylinder and others 5 Inch Diameter Casting FD4570 Wagner Boot Only unopened kits can be returned (2LBS) H 3" L 9" W 7" Box [Checked 12/2018] 5 $80.00   Call
293 WAG-A3075 Wagner Seal Part AD2955 aka AD-2955 Wagner Lockheed USA Pneumatic Seal 5 Inch O.D Used with Power Clusters AD833 Pneumatic Cylinder & others (2LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $120.00   Call
294 WAG-A3076 Wagner Repair Kit Part A3076 For an AF839 Air & Hydraulic Side 7 Inch Diameter 8 to 1 Ratio Includes: 74-425 Piston 418-81 73-627 Screw Part 419-81 306-96 Packing Part Wagner Boot (2LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $150.00   Call
295 WAG-A3077 Wagner Repair Kit Part A3077 For a AF840 Power Cluster 10 Parts Included: AD2918 Pneumatic Seal Ring, FC-6433 Hydraulic Piston, AC-2034 Boot FD-951 Cup 1 & 3/4 Inch Dia., Neoprene Ring 1 & 9/16 Dia 9/16 I.D "Top Hat" Style Check Valve, Packing by 22 Inches Fibre Gasket @ 1 & 7/8 Dia., Snap Ring & Wire Fastener Master Cylinder Casting FE1099 Wagner Boot Used with AD833 Pneumatic Cylinder and others (2LBS) H 3" L 9" W 7" Box [Checked 12/2018] 7 $180.13   Call
296 WAG-A37470 Wagner RF Air Valve Part A37470 aka AF37430 Normally a Stock Item Dated 12/18 - 5 $176.00   Call
297 WAG-A39211 Wagner Repair Kit Part A39211 For a A46284 Power Cluster Uses Mineral Oil Only NOT DOT 3 Brake Fluid 7 Inch Diameter Air Chamber (2LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $276.75   Call
298 WAG-A39219 Haldex Repair Kit Part A39219 Evaporator Service Kit Normally a Stock Item [Amazon] Product available at Amazon.com and BrakeProducts.com (1LBS) H 5" L 4" W 5" Box 3 $23.10   Call
299 WAG-A39248 Wagner Repair Kit For a AF70494 Power Cluster (2LBS) H 3" L 9" W 7" Box [Checked 12/2018] 7 $286.33   Call
300 WAG-A46284 Wagner Power Cluster Part A46294 For use with MINERAL OIL ONLY For DOT 3 Brake Fluid use part AF840 (37LBS) H 9" L 17" W 9" Box [Checked 12/2018] 4 $1,418.75   Call
301 WAG-A70494 Wagner Pressure Cluster Part A70494 7 Inch Power Cluster Only uninstall Power Clusters can be returned (26LBS) H 8" L 12" W 10" Box [Checked 12/2018] 4 $1,050.00   Call
302 WAG-A75422 Wagner Repair Kit Part A75433 For Pressure Cluster J98275 10 Parts Included 2 Piece Piston 5 Inch Bore AD-2955, 5 Inch Seal Ring with Internal Spring Check Valve Master Cylinder Casting FE1099 (2LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $494.83   Call
303 WAG-A75431 Wagner Repair Kit Part A75431 For a J98274 Disc Brake Power Cluster 1 X 15 Ratio Pressure Ratio 7 Inch Diameter Pneumatic Bore 1.75 Inch Diameter Hydraulic Bore Includes 11 Parts: Air Piston Cup AD-2918 Felt Washer on the Pneumatic Side Secondary Seals Main Piston Secondary Piston Compensating Check Valve Back-Up Washer Primary Cup FC-89534 Zero Residual Check Valve on the Hydraulic Side Boot AC-2034 Spring Clip For use with Dot 3 Brake Fluid Only, SAE 1703 aka A075431 & AC75431 (2LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $466.38   Call
304 WAG-A834 Wagner Wheel Cylinder Part A834 1.75 Inch Bore Diameter Only uninstalled parts can be returned Ships from Stock Dated 3-19 (3LBS) H 3" L 9" W 7" Box 4 $600.00   Call
305 WAG-A837 Wagner Power Cluster Part A837 5 Inch Power Cluster Only uninstall Power Clusters can be returned (22LBS) H 8" L 12" W 10" Box [Checked 12/2018] 4 $814.57   Call
306 WAG-A838 Wagner Power Cluster Part A838 6 Inch Pneumatic Diameter Has Master Cylinder F661 Master Cylinder Casting FD2704 The Pressure Line is off the Side Repair Kit for above A3075 (23LBS) H 8" L 12" W 10" Box [Checked 12/2018] 4 $726.65   Call
307 WAG-A839 Wagner Power Cluster Part A839 aka AF839 7 Inch Pneumatic Cylinder 8 to 1 Ratio The Repair Kit is Part # A3076 Only uninstall Power Clusters can be returned (30LBS) H 8" L 12" W 10" Box [Checked 12/2018] 4 $893.16   Call
308 WAG-A840 Wagner Pressure Cluster Part AF840 Pneumatic to Hydraulic Power Cluster 1.75 Inch Part F1701 Hydraulic Master Cylinder 7 Inch Pneumatic Bore For use with Dot 3 Brake Fluid Only aka A840 The Repair Kit is part A3077 (37LBS) H 9" L 17" W 9" Box [Checked 12/2018] 5 $846.66   Call
309 WAG-A88740 Wagner Valve Part WAG-A088740 Push Valve Push to Release Normally Closed Parking Bleed Valve aka A078874999 [Amazon] (2LBS) H 4" L 8" W 5" Box 3 $173.71   Call
310 WAG-A88862 Wagner Power Cluster Solid Piston in the Master Cylinder 7 Inch Diameter Pneumatic Cylinder (35LBS) H 9" L 17" W 9" Box [Checked 12/2018] 4 $1,169.21   Call
311 WAG-A89280 Wagner Part Part A89280 Stroke Indicator for Power Clusters: J98274 A840 J54086 A88862 Only uninstall Parts can be returned (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $55.00   Call
312 WAG-A89281 Wagner Stroke Indicator Part A89281 For Power Clusters: J98275 A837 A838 A70494 Only uninstall Parts can be returned (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $55.00   Call
313 WAG-AD2918 Wagner Seal Part AD2918 Pneumatic Seal 7 Inches in Diameter Part of Repair Kit A075431 For Disc Brake Power Cluster J098274 & AF840 (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 5 $42.47   Call
314 WAG-AD2955 Wagner Seal Part AD2955 aka AD-2955 Wagner Lockheed USA Pneumatic Seal 5 Inch O.D Used with Power Clusters AD833 Pneumatic Cylinder & others (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 5 $50.00   Call
315 WAG-AD2957 Wagner Seal Part AD2957 6 Inches in Diameter For Power Clusters, Pneumatic Cylinders (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $50.00   Call
316 WAG-AE837 Wagner Power Cluster Part AE837 1.25 Inch Master Cylinder Casting FD4570 Repair Kit A3074 Ships from stock Dated 11/18 - 2 $814.57   Call
317 WAG-AF70494 Wagner Power Cluster With Master Cylinder Part WAG-F34074 Normally a Stock Item 7/14 - 2 $1,097.58   Call
318 WAG-F009313 Wagner Brake Fluid 21B Super Heavy Duty DOT 3 Anti Corrosives Added High Lubricity Formulation 401 F / 205 C Dry Boiling Point SAEJ1703, Fed Spec VV-B-680 Conforms to FMVSS 116 Case of Quarts Qty. 12 Pieces per Case (30LBS) H 12" L 12" W 12" Box [Checked 12/2018] - 7 $96.00   Call
319 WAG-F102010 Wagner Repair Kit Part F102010 For the Power Head only Casting # AF31452 Repairs the Power Side Only Filter, Gasket, Snap Ring, O'Ring, 2 piece Seal, Seal & a Boot (2LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $85.70   Call
320 WAG-F105051 Wagner Master Cylinder Part F105051 1.75 Inch Bore Diameter 2 Piece Piston For use with DOT 3 Brake Fluid No Check Valve Repair Kit Part F89086 Dated 3/14 (6LBS) H 5" L 8" W 5" Box 4 $817.34   Call
321 WAG-F105156 Wagner Master Cylinder Part F105156 Casting # FE3419 2 Piece Piston New, Not remanufactured No core charge (8LBS) H 4" L 10" W 8" Box [Checked 12/2018] 3 $358.80   Call
322 WAG-F105157 Wagner Master Cylinder 1.5 Inch Bore 2 Piece Piston Casting #s FE105168, FD1387 FC31545 & FE3419 Repair Kit Part F89149 (8LBS) H 4" L 10" W 8" Box [Checked 12/2018] 4 $334.88   Call
323 WAG-F106471 Wagner Repair Kit Master Cylinder Part F106471 For Casting FE2693 Dated 8/18 - 1 $27.09   Call
324 WAG-F1193 Wagner Master Cylinder - 1 $181.11   Call
325 WAG-F12210 Wagner Repair Kit For Master Cylinder F13066 Casting FE105168 With a Single Piece Piston For use with DOT 3 Brake Fluid Only (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $101.91   Call
326 WAG-F122168 Wagner Cap Part F122168 Plastic Cap Can Replace F12103 For Master Cylinder F2796 Casting FE2693 Normally a stock item Dated 3/18 (1LB) H 4" L 5" W 4" Box 2 $16.07   Call
327 WAG-F1241 Wagner Bolt (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $9.96   Call
328 WAG-F1242 Wagner Gasket (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 45 $1.24   Call
329 WAG-F1243 Wagner Gasket. Copper Gasket (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 30 $0.75   Call
330 WAG-F131067 Wagner Master Cylinder For Power Cluster A131023 Part WAG-F131067 Wagner Master Cylinder For a Clutch Casting # FE23482 Part WAG-F36764 Includes the Push Rod Repair Kit F36764 (11LBS) H 4" L 10" W 8" Box [Checked 12/2018] 4 $330.26   Call
331 WAG-F14199 Wagner Boot Part F14199 Mushroom Boot At the end of F1701 to Pneumatic Cylinder Normally a stock item Dated 6/18 - 4 $18.16   Call
332 WAG-F1476 Wagner Master Cylinder Casting # FD6656 Repair Kit Part WAG-F106470 (5LBS) H 4" L 10" W 8" Box [Checked 12/2018] 4 $102.69   Call
333 WAG-F16500 Wagner Cap Part F16500 Metal Filler Cap Replaces F12103 which is obsolete Fits Master Cylinder Casting FE1575 Uses Gasket WAG-F6019 which is not included [Amazon] Dated 1/18 (1LBS) H 4" L 5" W 4" Box 19 $15.87   Call
334 WAG-F17 Wagner Copper Gasket (1LB) H 4" L 5" W 4" Box 750 $0.95   Call
335 WAG-F1701 Wagner Master Cylinder Part F1701 Casting FE1099 For Power Cluster Part AF840 and J098274 1.75 Inch Bore Diameter Solid Piston Design, "Top Hat" Style Check Valve For use with DOT 3 Brake Fluid Wagner Master Cylinder for a Clutch Part F36764 Casting # FE23482 Includes the Push Rod Repair Kit F33262 Normally a Stock Item 8/14 (11LBS) H 6" L 8" W 6" Box 5 $330.57   Call
336 WAG-F17306 Wagner Cap Part F17306 For J098274, J098275 & F1701 Does not include the Gasket Part WAG-F6019 Has Casting # FC12103 [Amazon] Dated 1/18 (1LBS) H 4" L 5" W 4" Box 4 $25.44   Call
337 WAG-F1787 Wagner Wheel Cylinder Part F1787 Casting FD1228 Wheel Cylinder Part F1787 Only uninstalled Wheel Cylinders can be returned Normally a Stock Item, PA (5LBS) H 3" L 9" W 7 Box - 2 $135.00   Call
338 WAG-F18299 Wagner Cap - 1 $17.86   Call
339 WAG-F19476 Wagner Repair Kit Part WAG-F19476 For a F73465 Master Cylinder Casting # FE24119 Includes: Piston, Boot, Cup, Lock wire Check Valve, Rubber Washer [Amazon] (1LBS) H 6" L 6" W 6" Box 6 $44.93   Call
340 WAG-F2109 Wagner Cup 1 Inch Diameter (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 5 $6.83   Call
341 WAG-F2395 Wagner Boot Actuator Boot Item 11 For Actuating Cylinders J007905, J023437 J008765 & others (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $31.00   Call
342 WAG-F2678 Wagner Fitting Part F2678 1/4 Inch Tube Seat 19/32 Inch Bolt Hole Only Unopened Parts can be returned (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 12 $15.00   Call
343 WAG-F2936 Wagner Cup Part FC2936 aka F2936 1.125 Inch Diameter For a Wheel Cylinder (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 12 $5.40   Call
344 WAG-F2952 Wagner Connector 7/16-20 X 7/16-24 (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 8 $5.70   Call
345 WAG-F2981 Wagner Master Cylinder Part F2981 1 & 3/4 Inch I.D. Bore Uses DOT 3 Brake Fluid Has the Solid Piston Design No Check Valve From Casting # 1099FE Repair Kit Part F8450 (11LBS) H 4" L 10" W 8" Box [Checked 12/2018] 4 $363.33   Call
346 WAG-F3023 Wagner Cup Part F3023 7/8 / 0.875 Inch Diameter 11/32 Inch High EIS R31 / R37 120 USA aka FD-118163 F3023 (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $12.50   Call
347 WAG-F3175 Wagner Seal Part F3175 aka FD3175 1.75 Inch Outside Diameter 1.25 Inch Inside Diameter 0.25 Inch Width Dated 12/18 (1LBS) H 3" L 9" W 7" Box 4 $5.63   Call
348 WAG-F33124 Wagner Repair Kit Part F33124 For Slave Cylinder Part F26022 Casting # FE21637 Includes 3 Parts: Boot Neoprene Ring Locking Ring Normally a Stock Item [Amazon] Dated 6/18 (1LB) H 4" L 8" W 4" Box 6 $50.20   Call
349 WAG-F33262 Wagner Repair Kit Part F33262 For Master Cylinder F1701 Casting Number FE1099 Includes 7 items: Single Piece Piston FC6433 with Rubber Seal Cup FD951, Rubber Bushing 1 & 7/16 Dia 9/16 I.D Check Valve, Diaphragm 1.5 Dia 2 Spring Clips, 1 Fiber Gasket (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 4 $71.61   Call
350 WAG-F3613 Wagner Repair Kit Master Cylinder Part F3613 For a FD2951, F2765 & F681 Master Cylinder Single Piece Piston Piston has a cone hole in center For rod operation Dated 1/18 - 1 $39.48   Call
351 WAG-F3622 Wagner Repair Kit Part WAG-F3622 For a Master Cylinder Part WAG-F661 1 & 1/2 Inch Diameter Includes: Check Valve Cup Piston Lock Ring & Boot (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $28.80   Call
352 WAG-F3631 Wagner Repair Kit For a F1461 Master Cylinder With a 1.125 Inch Bore Casting FE2539 (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $41.42   Call
353 WAG-F40462 Wagner Wheel Cylinder Part WAG-F40462 Casting # FD40510 The Repair Kit is Part WAG-F3618 Dated 5/15 - 2 $140.26   Call
354 WAG-F4073 Wagner Plug with Breather Part F4073 For Control Cylinder J19907 OBSOLETE AS OF 6/18 though we still have some left (1LBS) H 4" L 5" W 4" Box 18 $24.00   Call
355 WAG-F4158 Wagner Cup Part F4158 3/4 Inch aka FC4158 (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 34 $12.70   Call
356 WAG-F4377 Wagner Cup Master Cylinder Cup 1 Inch O.D. Normally a Stock Item PA 9/14 [Amazon] (1LB) H 4" L 5" W 4" Box 11 $10.00   Call
357 WAG-F4481 Wagner Fitting Part F4481 Brass Fitting / Plug For a J98274 & J98275 Disc Brake Power Cluster (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 12 $24.24   Call
358 WAG-F4572 Wagner Master Cylinder 1.25 Inch Diameter Bore Used on a A837 Power Cluster (8LBS) H 4" L 10" W 8" Box [Checked 12/2018] 4 $107.57   Call
359 WAG-F5922 Wagner Gasket Part F5922 For a F4073 Cap And others Normally a Stock Item Dated 10/15 (1LBS) H 5" L 4" W 5" Box 29 $3.15   Call
360 WAG-F6019 Wagner Gasket Part F6019 Cap Gasket Fits Caps F12103, F17306 & F16500 (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 13 $3.80   Call
361 WAG-F6430 Wagner Spring in the F1099, Item 22 on Page 214 Section 3110 (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $18.40   Call
362 WAG-F6431 Wagner Spring Main Spring in a Master Cylinder F2981 (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $22.54   Call
363 WAG-F661 Wagner Master Cylinder Part F661 1 & 1/2 Inch Bore Single Piece Piston Check Valve For use with DOT 3 Brake Fluid Only Casting FD2704 Repair Kit is Part WAG-F3622 (8LBS) H 4" L 10" W 8" Box [Checked 12/2018] 4 $108.36   Call
364 WAG-F6630 Wagner Wheel Cylinder Part WAG-F6630 2 Inch O.D. Casting FD6145 Repair Kit F8457 Product available at Amazon.com and BrakeProducts.com [Amazon] (5LB) H 4" L 5" W 4" Box 9 $47.17   Call
365 WAG-F666 Wagner Cup Part FC666 aka F666 Wheel Cylinder Cup 1.25 Inch Diameter (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $3.58   Call
366 WAG-F673 Wagner Banjo Bolt Part F673 1/2"-20 Thread Requires Copper Gaskets, F602 & F603 Which are NOT included Only uninstalled parts can be returned Ships from Stock Dated 1-19 14 $8.50   Call
367 WAG-F78507 Wagner Cup 1.5 Inch Diameter with a hole in center Casting FD2704 Modified FD-9222 with hole in center Part WAG-F78507 7/15 (1LB) H 4" L 5" W 4" Box 6 $7.02   Call
368 WAG-F8449 Wagner Repair Kit Part WAG-F8449 For a F2842 & F5652 Master Cylinder 1.75 Inch Bore Diameter For use with DOT 3 Brake Fluid Only (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $39.64   Call
369 WAG-F8450 Wagner Repair Kit Part F8450 For a Master Cylinder F2981 Casting 1099FE For DOT 3 Brake Fluid 1 Piece Piston Design No Check Valve 1.75 Inch Diameter 6 Part in the Repair Kit FC-6433 Piston 14199 ERC 03 Boot FD-951 Cup Fibre Washer Spring Clip & Wire Clip (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 3 $67.10   Call
370 WAG-F8456 Wagner Repair Kit Part F8456 For a Master Cylinder F2951 Which has Casting # F1575 For use with Brake Fluid No check valve is supplied or required Normally a stock item, PA Dated 4/18 - 1 $36.59   Call
371 WAG-F8457 Wagner Repair Kit Part F8457 Wheel Cylinder Repair Kit Repairs Wheel Cylinder Part F6630 2 Inch Bore For Casting # FD6145 Includes 2 Cups & 2 External Boots Ships from Stock Dated 1-19 4 $23.25   Call
372 WAG-F89086 Wagner Repair Kit Part F89086 For Master Cylinders WAG-F99549 & WAG-F99548 Which have Casting # FE1099 Includes 7 items: 2 Piece Piston with FD3175 Seal Check Valve with the Round Top Cup Part WAG-FC89534 2.75 Inch Rubber Washer 1.5 Inch Fibre Washer 1.75 Inch Fibre Washer 1.875 & a Snap Ring Ships from Stock Dated 3-19 (1LB) 6 $263.96   Call
373 WAG-F89149 Wagner Repair Kit Part F89149 For a Master Cylinder Master Cylinder Part F105157 With a 1.5 Inch Bore Has a 2 Piece Piston Assembly Casting # FE105168 & FE3419 Includes FD1387 & FC31545 5/15 (2LBS) H 4" L 6" W 4" Box - 2 $226.16   Call
374 WAG-F89534 Wagner Cup Part F89534 U Cup (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 12 $23.70   Call
375 WAG-F9313 Wagner Brake Fluid 21B Super Heavy Duty DOT 3 Anti Corrosives Added High Lubricity Formulation 401 F / 205 C Dry Boiling Point SAEJ1703, Fed Spec VV-B-680 Conforms to FMVSS 116 Case of Quarts Qty. 12 Pieces per Case (30LBS) H 12" L 12" W 12" Box [Checked 12/2018] 6 $96.00   Call
376 WAG-F9314 Wagner Brake Fluid 21B Super Heavy Duty DOT 3 Anti Corrosives Added High Lubricity Formulation 401 F / 205 C Dry Boiling Point SAEJ1703, Fed Spec VV-B-680 Conforms to FMVSS 116 Case of Gallons Qty. 4 Pieces per Case (39LBS) H 12" L 16" W 9" Box [Checked 12/2018] 6 $174.00   Call
377 WAG-F951 Wagner Cup 1 & 3/4 Inch Diameter (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $6.00   Call
378 WAG-F962 Wagner Cup Part F962 Master Cylinder Cup 1.50 Inch in Diameter Solid Cup no hole aka FD962 Dated 8/17 - 29 $5.14   Call
379 WAG-F9704 Wagner Cup 1 & 1/8th Inch Diameter 1.125 For use in a Hydraulic Actuator J007905 or J008765 aka J009704 (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 5 $6.60   Call
380 WAG-F99548 Wagner Master Cylinder For the J98274 Disc Brake Power Cluster Wagner Master Cylinder For a Clutch Casting # FE23482 Part WAG-F36764 Includes the Push Rod Repair Kit F36764 (11LBS) H 4" L 10" W 8" Box [Checked 12/2018] 4 $817.34   Call
381 WAG-F996 Wagner Fitting (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $5.00   Call
382 WAG-FC122168 Wagner Cap Part FC122168 NOW OBSOLETE SEE F16500 [Amazon] Dated 6/16 (1LB) H 4" L 5" W 4" Box 1 $16.07   Call
383 WAG-FC1242 Wagner Gasket. Copper Gasket (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] - 36 $1.25   Call
384 WAG-FC134280P Wagner Brake Fluid 21B, Heavy Duty DOT 3 Anti Corrosives added High Lubricity Formulation 401 F / 205 C , Dry Boiling Point SAEJ1703, Fed Spec VV-B-680 Conforms to FMVSS 116 One Pint (1LBS) H 4" L 10" W 8" Box [Checked 12/2018] 6 $5.00   Call
385 WAG-FC134281 Wagner Brake Fluid 21B, Heavy Duty DOT 3 Anti Corrosives added High Lubricity Formulation 401 F / 205 C , Dry Boiling Point SAEJ1703, Fed Spec VV-B-680 Conforms to FMVSS 116 Case of Quarts, Qty. 12 Pcs per Case (32LBS) - 24 $9.90   Call
386 WAG-FC134281Q Wagner Brake Fluid 21B, Heavy Duty DOT 3 Anti Corrosives added High Lubricity Formulation 401 F / 205 C , Dry Boiling Point SAEJ1703, Fed Spec VV-B-680 Conforms to FMVSS 116 One Quart (3LBS) H 4" L 10" W 8" Box [Checked 12/2018] 6 $11.00   Call
387 WAG-FC134282G Wagner Brake Fluid 21B, Heavy Duty DOT 3 Anti Corrosives added High Lubricity Formulation 401 F / 205 C , Dry Boiling Point SAEJ1703, Fed Spec VV-B-680 Conforms to FMVSS 116 1 Gallon (11LBS) H 8" L 12" W 10" Box [Checked 12/2018] 4 $35.16   Call
388 WAG-FC2395 Wagner Boot Actuator Boot Item 11 For Actuating Cylinders J007905, J023437 J008765 & others (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] - 4 $31.00   Call
389 WAG-FC666 Wagner Cup Part FC666 aka F666 Wheel Cylinder Cup 1.25 Inch Diameter (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 16 $3.58   Call
390 WAG-FC6858 Wagner Header Screw Part FC6858 Only uninstalled parts can be returned (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $2.50   Call
391 WAG-FC89534 Wagner Cup (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] - 28 $22.10   Call
392 WAG-FD10122 Wagner Wheel Cylinder Part FD10122 Casting FD10122 1.25 Inch Bore For DOT 3 Brake Fluid Only Only uninstalled Wheel Cylinders can be returned (3LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $98.00   Call
393 WAG-FD118163 Wagner Cup 7/8 / 0.875 Inch Diameter 11/32 High EIS R31 / R37 120 USA aka 3023, FD118163 F3023 8/14 - 20 $12.50   Call
394 WAG-FD1228 Wagner Wheel Cylinder Part FD1228 Casting FD1228 Wheel Cylinder Part F1787 Only uninstalled Wheel Cylinders can be returned (5LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $135.00   Call
395 WAG-FD19106 Wagner Wheel Cylinder Part FD19106 Casting FD19106 1.50 Inch Bore Tube Seats For DOT 3 Brake Fluid Only Only uninstalled Wheel Cylinders can be returned (4LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $80.00   Call
396 WAG-FD19110 Wagner Wheel Cylinder Part FD19110 Casting FD19110 1.75 Inch Bore Tube Seats For DOT 3 Brake Fluid Only Only uninstalled Wheel Cylinders can be returned (4LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $75.00   Call
397 WAG-FD19112 Wagner Master Cylinder Part FD19112 Casting Part FD19112 1.875 Inch Bore Diameter Tube Seats Only uninstalled parts can be returned (4LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $125.00   Call
398 WAG-FD2109 Wagner Cup (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] - 6 $10.25   Call
399 WAG-FD2704 Wagner Master Cylinder Part FD2704 1.50 Inch Bore Diameter 2 Piece Piston Only uninstalled parts can be returned (8LBS) H 4" L 10" W 8" Box [Checked 12/2018] 4 $300.00   Call
400 WAG-FD3172 Wagner Wheel Cylinder Part A834 1.75 Inch Bore Diameter Only uninstalled parts can be returned Ships from Stock Dated 3-19 (3LBS) H 3" L 9" W 7" Box 6 $97.00   Call
401 WAG-FD40462 Wagner Wheel Cylinder Casting # FD40510 (4LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $130.92   Call
402 WAG-FD4247 Wagner Wheel Cylinder Part FD4247 Casting Part FD4247 1.5 Inch Bore Diameter Wheel Cylinder For use with DOT 3 Brake Fluid Only Only uninstalled parts can be returned (4LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $143.00   Call
403 WAG-FD4377 Wagner Cup 1 Inch Diameter With Molded in Copper Ring (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] - 6 $10.75   Call
404 WAG-FD470 Wagner Wheel Cylinder Part FD470 1.5 Inch Diameter Bore For use with DOT 3 Brake Fluid Only Only uninstalled parts can be returned (3LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $70.00   Call
405 WAG-FD6145 Wagner Wheel Cylinder Part FD682 Casting FD6145 2.00 Inch Bore For DOT 3 Brake Fluid Only Only uninstalled Wheel Cylinders can be returned Ships from Stock Dated 1-19 8 $95.00   Call
406 WAG-FD682 Wagner Wheel Cylinder Part FD682 Casting FD682 1.75 Inch Bore For DOT 3 Brake Fluid Only Only uninstalled Wheel Cylinders can be returned (5LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $88.00   Call
407 WAG-FD951 Wagner Cup Part FD951 1 & 3/4 Inch Diameter (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 18 $6.00   Call
408 WAG-FD-951 Wagner Cup 1 & 3/4 Inch Diameter (1LBS) H 3" L 9" W 7" Box [Checked 12/2018] 12 $6.00   Call
409 WAG-FE2693 Wagner Master Cylinder Part FE2693 1.00 Inch Bore Diameter Only uninstalled parts can be returned (4LBS) H 3" L 9" W 7" Box [Checked 12/2018] 4 $80.00   Call
410 WAG-FE777 Wagner Master Cylinder Part FE777 1.75 Inch Bore No Check Valve Only uninstalled parts can be returned (10LBS) H 4" L 10" W 8" Box [Checked 12/2018] 4 $230.00   Call
411 WAG-J098274 Wagner Power Cluster Part J098274 Disc Brake Power Cluster 1 X 15 Ratio 7 Inch Diameter Pneumatic Bore 1.75 Inch Diameter Hydraulic Bore Includes Mounting Bracket A75420 3/8-18 NPTF Pneumatic Inlet Qty. 3 Hyd. Outlet Ports 1/2-202B. Qty 2 Ports Plugged with F996 Plugs & F17 Gaskets Stroke Indicator with 2.6 Inches of Active Travel 5.0 Cubic Inch Brake Fluid Displacement per Stroke SAE 1703 Dot 3 Brake Fluid Only Replaces JF71883 aka JF98274 (38LBS) H 9" L 17" W 9" Box [Checked 12/2018] - 2 $1,757.04   Call
412 WAG-J098275 Wagner Power Cluster Disc Brake Power Cluster 1 X 8 Ratio 5 Inch Diameter Pneumatic Bore 1.75 Inch Diameter Hydraulic Bore Includes Mounting Bracket A75420 3/8-18 NPTF Pneumatic Inlet. Qty. 3 Hyd. Outlet Ports 1/2-202B. Qty 2 Ports Plugged with F996 Plugs & F17 Gaskets Stroke Indicator with 2.6 Inches of Active Travel 5.0 Cubic Inch Brake Fluid Displacement per Stroke SAE 1703 Dot 3 Brake Fluid Only Replaces JF71882 (36LBS) 3/12 - 1 $1,756.00   Call
413 WAG-J107065 Wagner Power Cluster 1.75 Inch Diameter Casting # 1099FE 1/16 - 6 $1,654.77   Call
414 WAG-J107161 Wagner Repair Kit Part J107161 For a Master Cylinder Includes 9 Items 1 Pneumatic Seal 7 Inch Diameter with Spring AD2918 Piston Aluminum with Rubber Seal Inner Piston & Screen O-Ring 7 Inch Diameter Cup 1 & 7/16" Dia, 3/4 I.D. Fibre Washer 1.75 O.D., 0.75 I.D. Snap Ring 2.125 O.D. Fibre Washer 1 & 7/8" O.D. 1.625 I.D. Accordion Boot AC-2034 Packing Fibre by 21 Inches (2LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $471.30   Call
415 WAG-J107170 Wagner Power Cluster Disc Brake Power Cluster AF840 5 to 1 Ratio Without the Zero Residual Check Valve With F996 Plugs F4481 Adaptor Fitting & F17 Copper Gaskets 8/16 - 1 $1,082.60   Call
416 WAG-J54085 Wagner Pressure Cluster 1 X 5 Pressure Ratio Air / Hydraulic (30LBS) H 8" L 20" W 9" Box [Checked 12/2018] 4 $1,639.91   Call
417 WAG-J54086 Wagner Pressure Cluster 1 X 8 Pressure Ratio Air / Hydraulic (32LBS) H 9" L 17" W 9" Box [Checked 12/2018] 8 $1,639.91   Call
418 WAG-J83714 Wagner Repair Kit For a J054085 Pressure Cluster 1 X 5 Ratio 9 Items: 5.875 Inch Dia Diaphragm 1 Piston,FD-951 Cup Check Valve, Neoprene Bushing Fibre Washer, Wire Clip C Spring Clip Kit F33262 (3LBS) - 2 $230.00   Call
419 WAG-J83715 Wagner Repair Kit For a J54086 Pressure Cluster Part WAG-J83715 1 X 8 Pressure Ratio 10 Items: AD-2965 Pneumatic Seal Ring FC-6433 Piston AC-2034 Boot FD-951 Cup Fibre Washer Rubber Spacer Check Valve Internal Spring Clip Wire Retainer 15 Inches of Packing Material (2LBS) H 3" L 9" W 7" Box [Checked 12/2018] 6 $352.39   Call
420 WAG-J98274 Wagner Power Cluster Part J098274 Disc Brake Power Cluster 1 X 15 Ratio 7 Inch Diameter Pneumatic Bore 1.75 Inch Diameter Hydraulic Bore Includes Mounting Bracket A75420 3/8-18 NPTF Pneumatic Inlet Qty. 3 Hyd. Outlet Ports 1/2-202B. Qty 2 Ports Plugged with F996 Plugs & F17 Gaskets Stroke Indicator with 2.6 Inches of Active Travel 5.0 Cubic Inch Brake Fluid Displacement per Stroke SAE 1703 Dot 3 Brake Fluid Only Replaces JF71883 aka JF98274 Dated 12/18 (38LBS) H 9" L 17" W 9" Box 4 $1,757.04   Call
421 WAG-JFC9704 Wagner Cup 1 & 1/8th Inch Diameter 1.125 For use in a Hydraulic Actuator J007905 or J008765 aka J009704 [Amazon] (1LB) H 3" L 4" W 4" Box 2 $6.60   Call
Secure Online Order

 
Secure Online Order
 
75,544 part numbers available for
online order
 
Shopping Cart
Empty
Checkout is secure
 
All products are covered by a $1,000,000 liability insurance:
Click to view the Certificate

Products Available From Stock
Free shipping via UPS Ground (continental US only, motor freight excluded)
 
Web Site Features
 
Part Number Lookup
 
Enter at least three characters of a part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:
 
Part Number:

 
Search scope:
This web site only
All BPI web sites
 
Formal PDF Quotation
 
To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.
 
Your shopping cart is kept intact and you can still check out at a later time.
About Brake Products, Inc.
 
About Brake Products, Inc.
 
Brake Products, Inc. is more than an authorized distributor, we are real stocking distributor with inventory in excess of 2 million dollars. BPI has thousands of parts in our stock to protect your business with same day shipments till almost 7PM. With over 30 years of experience in the material handling business we are ready to assist you in making the right decisions for efficient motion control.
 
Brake Products specializes in the machining of Brake Wheels for AC & DC Industrial Brakes. We utilized CAD designed & engineered products with CNC machined tools to produce the "Perfect Brake Wheel" these wheels are not limited in design by a previously designed castings for universal use. BPI is an OEM brake wheel manufacturer for Crane Brake Manufacturers. Though we machine all the brake wheel surfaces for balance both static & dynamic balancing to your specification is available.
 
Please spend some time at our web site, an abundance of product information and CAD style PDF drawings are available to download & share. Pricing and a shopping cart for automated order entry can be done here. Please call with any questions. We would appreciate the opportunity to speak with you and provide a formal quotation.
 
Ductile Iron Brake Wheels

Ductile Iron Brake Wheels
 
We manufacture high-quality custom and standard brake wheels from 4-1/2" to 30" diameter, cast from the finest ASTM and ASME specified 80-60-03 Ductile Iron to provide maximum service and a high coefficient of friction. Machining is done on CNC equipment using solid dura bar or iron castings.
 
Brake wheels for all types of electric and hydraulically actuated brakes. Many wheels available for same day shipment; both pilot bore and finished bored for the 600 and 800 series mill motors.
 
Replacement Brake Parts

Replacement Brake Parts
 
Easily locate and purchase hard to find replacement parts for the following most popular brake assemblies:
 
  •  EC&M
  •  SQUARE-D
  •  WESTINGHOUSE
  •  CUTLER-HAMMER
  •  GEMCO
  •  MONDEL
 
Brake assembly diagrams and selection tables, backed by our extensive replacement brake parts stock, makes it as easy as "1-2-3".
 
OEM Products

 
Brake Products is proud to maintain excellent decades-long distrubutor relationships with industry-leading Original Equipment Manufacturers (OEM). We keep most popular items in stock to improve delivery times. These products are available to quote and purchase 24/7 on our e-commerce web sites, along with a multitude of installation and support information:
 
  •  Gemco (Ametek)
  •  Gleason Reel
  •  Aero-Motive
  •  Cutler-Hammer (Eaton)
  •  Hubbell
  •  SuperBolt
  •  Telemotive (Magnetek)
  •  Renold
  •  Stearns
 
For online purchases, shipping is free within continental U.S.
Electrical Contactors Parts

Electrical Contactors Parts
 
Easily locate and purchase hard to find replacement parts for the following most popular electrical contactors:
 
  •  Clark Control
 
Contactors assembly diagrams and selection tables, backed by our extensive replacement contactors parts stock, makes it as easy as "1-2-3".
 
 
Reels from Reelcraft

Reels from Reelcraft
 
Reelcraft manufactures over twenty five hundred models of hose, cord and cable reels, as diverse as heavy duty hose reels used in the light, medium, and heavy industry, automotive service and a wide variety of OEM applications. These models include spring retractable, motor driven and hand crank reels, handling hose lengths up to six hundred feet and ranging from 1/4 inch to 4 inches in diameter and beyond. The spring retractable models are widely used in industrial applications to improve efficiency and safety by keeping hoses and cables off the floor as well as maintenance areas to provide air or power when and where it is needed.
 
Non-Asbestos Overhead Crane Linings from Scan-Pac

Non-Asbestos Overhead Crane Linings from Scan-Pac
 
The industrial marketplace has a variety of brake and clutch requirements for overhead cranes. Scan-Pac's technical and application expertise can recommend and furnish the proper material to meet the specific need your operation demands. Numerous specific parts have been molded or machined to meet the unique requirements of a special application. Let Scan-Pac solve those vexing problems in your day-to-day production.
 
Scan-Pac's RF38 material has been accepted as a well proven material for these applications and has been in use for several decades.
 
 
 
Industrial Brakes and Brake Parts from Reuland

Industrial Brakes and Brake Parts from Reuland
 
Reuland offers a wide variety of brakes for various applications. Popular MagnaStop brake is a solenoid activated, spring set type brake. The MagnaStop brake is available in standard and dust-tight/waterproof enclosures in standard AC voltages. Torque ratings available range from (1.5-20) lb. Ft. The brake can be ordered as a traditional C-face mount or as a "double C-face" design. The MagnaStop can also be ordered as foot mounted design.
 
Reuland also offers a wide range of direct acting magnetic disc brakes. These brakes are also available as standard, dust-tight/waterproof, or marine duty enclosures. Torque ratings available vary from 1.5 to 1000 lb. Ft. Reuland brakes are defined as "fail safe". When power is applied to the brake, the brake releases the motor shaft. The load is then free to turn. When power is removed or lost, the brake grabs the motor shaft and stops the load. A brake release knob or flipper is provided to manually release the brake. Reuland offers both adjustable and non-adjustable designs. Reuland brakes are available in both single and three phase designs. Some brakes are available in DC power. Finally, Reuland offers it's "X" series brakes. These brakes are designed to mount to non-Reuland built motors.  
Industrial Brakes and Brake Parts from Wagner

Industrial Brakes and Brake Parts from Wagner
 
Our knowledge is second to none in regard to the old style Wagner brake. It may be worth knowing that Wagner Brake itself has not manufactured this style brake since 1981, yet we have never stopped supplying this brake to our large distributor network.
 
When it comes to air brake parts, our company roots go way back. We have an extensive library of air brake catalogs which has supplied our customers well over the years. Our knowledge is based mostly on the Bendix (formerly Bendix-Westinghouse), Wagner Air Brake, and the Midland Air Brake line.
 
 
Multiconductor and REDI-Bar from TransTech

Multiconductor and REDI-Bar from TransTech
 
Multiconductor is a compact, reliable, and safe power supply for cranes, hoisting equipment, warehouse equipment, overhead conveyor tracks, etc. Virtually worldwide application, in indoor and outdoor installations, even in unforgiving weather. You are always welcome to contact us directly, refer to the back cover of this brochure for detailed information on our address.
 
 
REDI-BAR is a factory-assembled, ready-to-install conductor bar system designed to simplify crane conductor installations and replacements from 64 amps up to 480 amps. With an installation that can be completed in just a few hours, REDI-BAR can be installed quickly and easily with minimal downtime. Standard 4-pole conductor bar assemblies are available off-the-shelf, while custom conductor bar assemblies are manufactured to order for unique applications.
 
Industrial Brakes and Brake Parts from MICO

Industrial Brakes and Brake Parts from MICO
 
Air/hydraulic actuators are designed to take advantage of available pressurized air sources to produce higher hydraulic pressures. They can be especially useful for towing self-propelled hydraulic brake vehicles when the towing vehicle is equipped with air.
 
Boosted-two fluid actuators are designed for use on vehicles that are equipped with other hydraulic power devices. This will normally eliminate the need for a separate power brake unit or separate hydraulic fluid system.
 
Remote actuators are designed to perform several functions. When used with two master cylinders hydraulic actuators prevent transfer of fluid from one system to another. Hand and pedal operated actuators can also be used as a master cylinder or prime mover. Linkage operated actuators allow you to mount your own pedal or lever arrangement to meet the specific needs of your application.
 
 
This web site is owned and operated by Brake Products, Inc.
Brake Products, Inc.   16751 Hilltop Park Place
  Chagrin Falls, Ohio 44023
  Phone: (440) 543-7962
  Fax:     (440) 543-7963
  Web:   www.brakeproducts.com
  Email: sales@brakeproducts.com
  Federal ID #: 34-1473351
  CAGE Code: 1QTP8
  DUNS# 14-748-2392
  Download: Form W-9
Supplier of Industrial Brake Parts Since 1985