Westinghouse Price List
| • BPI Home Page | • Aero-Motive P/L | • Ametek Gemco P/L | • Cutler-Hammer P/L | • Eldro P/L |
| Part No | Description | Price USD |
|---|---|---|
| 24D5096H11 | Westinghouse Spring. Wheel End Spring on a TM 19, 23 or 30 Inch Brake Tie Rod. Ref No. 10 1 per Brake Recommended Spare Part (3LBS) | $23.00 |
| 27D7221H04 | Westinghouse Bolt. Brake Shoe Bolt for a TM43 or TM63 Brake, E004070 Ref # 15, 2 per brake (1LB) | $113.00 |
| 318B777H08 | Westinghouse Wheel End Spring Seat on a TM-3014 Brake Assembly. Item # 11. 1 per brake E030036 8/8 | $251.00 |
| 318B788H07 | Westinghouse Block. Hinge Block, Magnet End on a TM-2311 Brake. E0023033 OBSOLETE see E023062. Item # 1 | $572.00 |
| 318B789H07 | Westinghouse Pin. Pivot Pin for a TM2311 Electric Brake, 4 per Brake, E023034 1/9 | $463.00 |
| 318B793H06 | Westinghouse Adjusting Screw for a TM1985 & TM2311 Brake Assembly. Page Ref. # 8. 1 Per Brake. E019040 8/1 | $259.00 |
| 31D4114H20 | Westinghouse Bushing on the Shoe Clapper Arm for a TM-1985 or TM-2311 Brake, 2 per brake E019028 6/6 (<1LB) | $28.00 |
| 31D4118H20 | Westinghouse Bushing on a TM3014 Brake, 14 per brake, E030045 8/8 | $37.00 |
| 3280B04G03 | Westinghouse Coil for a CB-15 Brake. 460 Volt 60 Hz. Single Phase, 4.5 Inch, E004102 (1LB) | $146.00 |
| 3280B04G11 | Westinghouse Coil for a CB75 Brake, 460VAC, 60 Hz., E007065 (2LBS) | $251.00 |
| 3280B04G15 | Westinghouse Coil for a CB-110 or CB-160 Brake Assembly. 460 Volt AC, 60 Hz E007066 (3LBS) | $403.00 |
| 423A298602 | Westinghouse Resistor. External Resistor for a TM-1035 Shunt Brake Assembly E010049 3/7 | $325.00 |
| 423A298G02 | Westinghouse Resistor. External resistor for a TM-1035 Brake Assembly E010044 | $325.00 |
| 426C041G01 | Westinghouse Lining. Brake Lining Kit for a TM-3014 30 Inch Brake Assembly . Kit includes 2 Drilled Linings & Rivets E030054 12/8 | $877.59 |
| 438A070H09 | Westinghouse Spring. Wheel End Spring on a TM1355 Brake Tie Rod. Ref No. 10 1 per Brake Recommended Spare Part E013041 (2LBS) | $30.00 |
| 438A072H03 | Westinghouse Spring. Main Spring on a TM2311 Brake Assembly. Item 3. 438A072H03, 1 per brake. Recommended spare part 1/9 | Call |
| 438A072H05 | Westinghouse Spring. Main Spring on a TM1985 Brake Assembly, Item Ref # 3, 1 per brake, recommended spare part E019044 10/8 | Call |
| 438A072H13 | Ametek Gemco Main Spring on a TM83 Brake Assembly, Ref. # 8, 1 per brake, a recommended spare part, E008039 | Call |
| 438A411H05 | Westinghouse Spring. Tension Spring on a TM1355 & TM1665 Brake, Item # 25, 2 per brake, recommended spare part (1LB) | $36.00 |
| 438A411H08 | Westinghouse Tension Spring for a TM3014 30 Inch Brake. Ref. # 28. 2 per brake. Recommended spare part. E030052 1/8 | $404.00 |
| 438A429H01 | Westinghouse Adjusting Screw Block for a TM2311 Brake Assembly, 1 per Brake, E023046 1/9 | $710.00 |
| 439C192G06 | Westinghouse Arm. Inner Brake Shoe Arm on a TM-1355 Brake Assembly. Ref. #21. 1 per brake. Item # 21, 1 per brake, E013067 | $657.00 |
| 439C201G01 | Westinghouse Brake Shoe & Lining Complete for a TM1355 or ET13, 13 Inch Diameter Electric Brake Assembly, Qty. 1, 2 per Brake, Ref. # 14, Bonded, Non-Asbestos Material E013025 (12LBS) 1/10 | $669.00 |
| 439C314G01 | Westinghouse Brake Shoe & Lining Complete for a TM-83 or ET-8, 8 Inch Diameter Electric Brake Assembly, Qty. 1, 2 per Brake, Ref. # 14, Bonded, Non-Asbestos Material E008025 (3LBS) | $474.00 |
| 439C394G01 | Westinghouse Brake Shoe & Lining Complete for a TM-1985 or ET-19, 19 Inch Diameter Electric Brake Assembly, Qty. 1, 2 per Brake, Ref. # 14, Bonded, Non-Asbestos Material E019024 (45LBS) 1/8 | $1,398.60 |
| 439C397G01 | Westinghouse Clapper. Inner Clapper & Arm for a TM 1985 Brake, 1 Per brake, Ref Item # 22, E019059 | Call |
| 450A849H01 | Westinghouse Adjusting Screw Block on a TM-3014 Brake. Ref # 7 1 per brake, E030034 8/8 | $803.00 |
| 450A869G01 | Westinghouse Bolt, Hardened Brake Shoe Bolt Assembly for a TM-3014 30 Inch Brake. Includes the Hex Nut. Ref. # 16, 2 per brake but sold individually, E030040 1/11 | $549.00 |
| 489C202G01 | Westinghouse Clapper & Arm for a TM1355 Brake. Inner Coil Arm. 1 per brake. Ref # 22. E013068 | $1,609.00 |
| 635C104G04 | Westinghouse Tie Rod on a TM11355 13 Inch Brake Assembly. Ref # 6. 1 per brake E013052 | Call |
| 635C104G06 | Westinghouse Tie Rod on a TM1985 19 Inch Brake Assembly. Ref # 6. 1 per brake E019057 | Call |
| 635C236G01 | Westinghouse Clapper & Arm on a TM-1665 Brake Assembly. Ref. #22. 1 per brake, E0016052 | $2,165.00 |
| 635C292G01 | Westinghouse Brake Shoe & Lining Complete for a TM-1035 or ET-10, 10 Inch Diameter Electric Brake Assembly, Qty. 1, 2 per Brake, Ref. # 14, Non-Asbestos Bonded Lining Material E010047 (5LBS) | $555.00 |
| 635C316G01 | Westinghouse Brake Shoe & Lining Complete for a TM-2311, 23 Inch Diameter Electric Brake Assembly, Qty. 1, 2 per Brake, Ref. # 14, Bonded, Non-Asbestos Material E023025 1/10 | $2,082.00 |
| 635C328G16 | Westinghouse Coil. Shunt Coil for a TM-1035 Brake Assembly. TM = Twin Magnet / Coils Brake, 2 Coils per brake, sold each, 2 required. 32 Volts per coil continuous duty, 40 Volts per coil intermittent duty, average resistance 24 Ohms. Coils are connected in series. Ref # 26 E010049 (30LBS) 1/9 | $2,236.00 |
| 635C384G16 | Westinghouse Coil. Shunt Wound Coil for a TM-1335 Brake Assembly. 32 Volts per coil continuous duty, 40 Volts per coil intermittent duty, average resistance per coil 19 Ohms. Cost per coil, brake requires 2 coils connected in series. Ref. # 26 E013026 (48LBS) | $3,244.00 |
| 637C373G16 | Westinghouse Coil for a TM-2311 Brake Assembly. Shunt Wound. 2 Coils are required for this brake. 32 Volts per coil continuous duty, 40 Volts per coil intermittent duty, average resistance 6.1 OHMS. Cost per coil, brake requires 2 coils connected in series. Ref # 26, E023026 1/10 | $10,253.00 |
| 637C384G16 | Westinghouse Coil. Shunt Wound Coil for a TM-1355 Brake Assembly. 32 Volts per coil continuous duty, 40 Volts per coil intermittent duty, average resistance per coil 19 Ohms. Cost per coil, brake requires 2 coils connected in series. Ref. # 26 E013026 | $3,244.00 |
| 637C504G16 | Westinghouse Coil. Shunt Coil for a TM-83 Brake Assembly. 2 Coils is required on this brake. 32 Volts per coil continuous duty, 40 Volts per coil intermittent duty, average resistance 31 Ohms. Cost per coil brake requires 2 coils connected in series. Ref # 26 E008026 | $1,936.00 |
| 637C504G23 | Westinghouse Coil, Series Wound Coil for a TM-83 Brake. Coil Amperes 1 Hour 4.1 AMPS. Coil Amperes 1/2 Hour 5.5 AMPS. Average Resistance 3.13 OHMS E008056 | $1,936.00 |
| 637C523G16 | Westinghouse Coil. Series Coil for a TM1985 Brake, 2 per brake, sold each, 637C523G16, 810 /612 Mill Motors, 0.124 Ohms Resistance Average, 180 Amps 1/2 Hour, 137 Amps 1 Hour E019062 (150LBS) | $7,830.00 |
| 637C530G16 | Westinghouse Coil. 16 Inch Series Coil, Special Series Coil for a TM16 Brake, 2 per brake, sold each, E016054, 808 / 610 Mill Motors, 0.0195 Ohms Resistance Average, 90 Volts Intermittent, 1 Hour / 125 Volts Continues Duty Cycle, 8 Hour. Specifications are for a single coil (100LBS) 1/11 | $4,212.00 |
| 637C551G16 | Westinghouse Coil. Series Coil for a TM13 Brake, 2 per brake, sold each, 637C551G16, 608 Mill Motor, 0.0358 Ohms Resistance Average, 85 Amps 1/2 Hour, 63 Amps 1 Hour (60 LBS) 12/6 | $3,244.00 |
| 637C551G17 | Westinghouse Coil. Series Coil for a TM13 Brake, 2 per brake, sold each, 637C551G16, 606 Mill Motor, Ohms Resistance Average, Amps 1/2 Hour, Amps 1 Hour (60 LBS) | $3,244.00 |
| 641C818G16 | Westinghouse Coil. 30 Inch Shunt Wound Brake Coil for a TM-3014 Brake. Sold each, 2 per brake E030024 | $12,673.00 |
| 645C173G16 | Westinghouse Coil. Shunt Wound Coil for a TM-63 Brake Assembly. Intermittent Duty, 1 Hour Cycle 80 Volts DC / 1.35 AMPS. Continuous Duty, 8 Hour Cycle 64 Volts DC / 1.08 AMPS. Average Cold Coil Resistance 59.4 OHMS. Ref # 26 1 coil per brake E006026 Resistors are required in series E006024 / Forcing E006025 (18LBS) | $1,115.00 |
| 645C173G27 | Westinghouse Coil. Series Wound Coil for a TM-63 Brake Assembly. E006 | $1,115.00 |
| 645C540G01 | Westinghouse Arm. Outer Clapper Arms on a TM-43 Brake. Ref # 25, 1 pair per brake, E004090 | $378.00 |
| 645C544G01 | Westinghouse Arm. Outer Brake Shoe Arm on a TM-43 Brake. Ref # 16, 1 per brake E004118 | $218.00 |
| 645C544G02 | Westinghouse Arm. Inner Brake Shoe Arms on a TM-43 Brake. Ref # 16, 1 pair per brake, E004119 | $302.00 |
| 645C545G16 | Westinghouse Coil. Shunt Wound Coil for a TM-43 Brake Assembly. Intermittent Duty, 1 Hour Cycle 80 Volts DC / 1.10 AMPS. Continuous Duty, 8 Hour Cycle 64 Volts DC / 0.88 AMPS. Average Cold Coil Resistance 73 OHMS. Ref # 26 1 coil per brake Resistors are required in series E004044 / Forcing E004045 (16LBS) | $1,063.00 |
| 645C545G26 | Westinghouse Coil. Series coil for a TM-43 Brake Assembly E005154 (8LBS) | $1,063.00 |
| 816C691G16 | Westinghouse Lining & Rivet Kit for a TM83 Electric Brake Assembly, 1 Pair, 8 Inch Diameter, E008057 | $55.00 |
| 861C691G18 | Westinghouse Lining Kit, pair of drilled & countersunk linings with fasteners for a TM1355, 13 Inch Diameter Brake. E013055 (3LBS) | $159.00 |
| 861C691G19 | Westinghouse Lining Kit, pair of linings & fasteners for a TM1655, 16 Inch Diameter Brake E016053 (7LBS) | $223.00 |
| AK103 | Westinghouse Brake OBSOLETE see CB-160 | Call |
| AK41 | Westinghouse Brake OBSOLETE see CB-15 | Call |
| AK43 | Westinghouse Brake OBSOLETE see CB-35 | Call |
| AK73 | Westinghouse Brake OBSOLETE see CB-75 | Call |
| 101350 | Westinghouse DI-167F Lining | $73.62 |
| 1591505 | Westinghouse 12.5 OHM Resistor | $819.69 |
| 1591508 | Westinghouse 25 OHM Resistor | $819.69 |
| 1591513 | Westinghouse 80 OHM Resistor | $819.69 |
| 367C530G16 | Westinghouse Coil. Series Coil for a TM-1665 Brake. 230 VDC for a Frame 610 Mill Motor. 2 per brake Sold each | $4,089.00 |
| 501573 | Westinghouse Coil. DI 135-F Series Brake Coil | $1,643.52 |
| 635C227G01 | Westinghouse Brake Shoe & Lining Complete for a TM-1665, 16 Inch Diameter Electric Brake Assembly, Qty. 1, 2 per Brake, Ref. # 14, Non-Asbestos Material Bonded to the Brake Shoe E016025 (31LBS) | $889.00 |
| 635C247G17 | Westinghouse Coil. 16 Inch Shunt Coil for a TM-1665 Brake Assembly. 32 Volts per coil continuous duty, 40 Volts per coil intermittent duty, average resistance 8.8 Ohms. Cost is per coil brake requires 2 coils connected in series. Ref # 26 E016026 | $4,089.00 |
| 637C729G16 | Westinghouse Coil. Series Wound Coil for a TM-1985 Brake. Sold each. 2 Coils per brake sold individually / each, 637C729G16 812 614 | $7,830.00 |
| 645C173G22 | Westinghouse Coil. Series Wound Coil on a TM63 Brake Assembly E006083 | $1,115.00 |
| 832942 | Westinghouse Coil. AK-43 Brake Coil. 220 Volt, 60 Hz., 50 Ft LB., Style 57N133 |
$750.00 |
| 861C691G06 | Westinghouse Lining Kit for AK Brake. Obsolete | Call |
| A200M4CX | Westinghouse Contacts for a Size 4, 135 Amp contactor, Cat # 765A558609 | $280.00 |
Prices are subject to change without notice. Last updated: 02/04/2012
 |
 |
 |
16751 Hilltop Park Place Chagrin Falls, Ohio 44023 Phone: (440) 543-7962 Fax: (440) 543-7963 Web: www.brakeproducts.com Email: sales@brakeproducts.com |
| Supplier of Industrial Brake Parts Since 1985 | |||