Mondel Price List
 
BPI Home Page
Aero-Motive P/L
Ametek Gemco P/L
Cutler-Hammer P/L
Eldro P/L
 
Part No Description Price
USD
Stock
Qty
102053 Mondel Brake Assembly, 8MSA-0140-MA-SH105V 8 Inch, Rated Torque 140 FT LBS, 105 Volts DC Shunt Wound Coil with Manual Lining Adjustment (88LBS) 7/12 $2,134.00 C/F
10BE-AA Mondel Auto Adjust , 110702 5/11 $745.00 C/F
10BE-MB-LS Mondel Brake Shoe Assembly, 10 Inch 2/12 $384.00 C/F
110060 Mondel Brake Shoe Assembly for a MBE / MBT 5 Inch Brake. Assembled Brake Shoe with Non-Asbestos Bonded Linings. MSD sheet availalble 1 WEEK 11/9 $260.06 C/F
110061 Mondel Brake Shoe Assembly for a MBE / MBT MB 8 Inch Brake. Assembled Brake Shoe with Non -Asbestos Lining Material. MSD sheet available 915F84-F 1/12 $348.00 2
110062 Mondel Brake Shoe, MB 10 Inch Diameter with bonded non-asbestos brake linings, 2 per brake, sold each 1/12 $388.00 4
110064 Mondel Brake Shoe Assembly for a MBE / MBT MB 16 Inch Brake. Assembled Brake Shoe with Non -Asbestos Lining Material. MSD sheet available 1/13 $807.00 C/F
110165 Mondel Brake Shoe and Lining Assembly. 29BE-MB-LS 19 Inch 6/12 $1,241.00 C/F
110292 Mondel Brake Shoe & Lining 6 Inch MST 3/13 $296.00 C/F
110811 Mondel Brake Shoe Assembly. 6 X 3 Inch Brake Shoe with Non-Asbestos Brake Lining. MSA, F225 62A 6WSA1
$296.00 2
110812 Mondell Brake Shoe Assembly. 8 Inch DC Brake MSA $324.00 C/F
110813 Mondel Brake Shoe Assembly. 10 Inch DC Brake MSA 7/9 $357.00 C/F
111721 Mondel Brake Shoe Assembly for a 16MBTEF-ED50-5 Brake. Bonded Non-Asbestos Lining Material. Sold each, 2 per brake 4/13 $818.00 C/F
111837 Mondel Brake Shoe Assembly for a 10 Inch MBTF Brake. Bonded linings, non asbestos material. Sold each, 2 per brake 4/13 $373.76 C/F
112812 Mondel Pull-Rod Assembly, item 64 Brake 102796 Drawing 552025. Assy,AA,BTE,16,ED50, ED80 10/12 $2,810.00 C/F
130416 Mondel Tie Rod on a SBE13 Brake 9/11 $211.50 C/F
130439 Mondel Pin Call C/F
131280 Mondel Link Spacer 5 Inch BT, was 130439 11/9 $22.46 C/F
13MBTEF-0550-AA-Ed50/5S-HR- Mondel Motor Brake W / Right Hand Latching Hand Release
13 Inch Mill Duty AC Thruster Shoe Brake
AIST - NEMA Rated
Maximum Rated AIST Torque of 550 FT. LBS
Factory Set to 370 Foot LBS
Rated Voltage 230/460 VAC, 3 Ph., 60 Hz.
3 Limit Switches to Indicate Brake Set, Brake Electrically Released and Brake Manually Released
Automatic Adjustment for Lining Wear
External Torque Spring
Latching Hand Release
Time Delay on the Set Valve
Actuator to be furnished with C10 Fluid
C10 Actuator Fluid has an Operating Temperature of -13 Degrees F to +122 Degrees F
Stainless Steel Fasteners
Actuator will be rotated 180 degrees to compensate for roll of the bridge
The Latching Hand Release will be on the Right Side of Brake
$11,488.00 C/F
142-10600 Mondel Rectifier MBC-4-230/460, 1X(5-13) Call C/F
17Z596 Mondel / P&H Morris Torque Spring on a 19 Inch MBE Brake. 240061 2000 FT LBS 7/6 $349.00 C/F
190033 Mondel Hydraulic Cylinder for a 10 Inch Type MBM Brake 8/10 $1,696.00 C/F
190237 Mondel Repair Kit for Thruster 190033. 8 or 10 Inch MBEM/MBM Brakes. Includes; 2 Hydraulic Cylinder Spacer, 2 Rod Seals, 1 Piston Seal, 2 O Rings, 2 Hydraulic Cylinder Spacers 190237/03 $144.00 C/F
200020 Mondel 5/8 Jam Nut $1.00 C/F
20F318D4 Mondel Shoe Holder Bolt $22.80 C/F
210153 Mondel Bolt. Brake Shoe Bolt for an 8 Inch MBE Brake 1/8 $7.00 4
212278 Mondel Bolt. Square Head Bolt 5/8 NC x 10.0 Long with Drilled Cotter Pin Hole. aka 20F314D3 4/13 $88.00 C/F
220033 Mondel Washer, DS-120, 0.445'' ID X 1.00 OD X 0.0492 Thick $5.00 C/F
220051 Mondel Washer, 0.500 / 0.510'' ID X 1.125 OD X 0.125 Thick $16.87 C/F
220071 Mondel Washer, PNH 18H3892D14 for a 23 Inch Diameter Brake, 1 & 9/16 Inch ID x 2 & 3/4 OD x 1/8 Inch Thick 1/10 $8.00 C/F
240074 Mondel Spring for a 10 Inch Type MBM Brake $73.00 C/F
280002 Mondel Fluid. Thruster Fluid, Morlina 10 Hyd Fluid or Mobil Velocite No 6 -13 to 122F / -25 to 50 C. 1 Liter ED23 Req 2 Liters ED50 Req 5 Liters 11/12 $42.00 C/F
320100 Mondel Thruster. Thruster Brake Actuator Part (48LBS) 5/12 $2,506.00 2
320775 Mondel Repair Kit for an ED23/5 Thruster 5/12 $257.00 C/F
350003 Mondel Brake Coil, BE,8, Static, F for a 8MBE Brake Assembly Call C/F
410002 Mondel Plunger for a 5 to 19 MBT $47.00 C/F
8'' ABW Mondel Brake Wheel, 8 Inch Diameter, ABW, with a Stock Bore, 120279 4/10 $515.00 C/F
8MBE-0100-AA-SE Mondel 8 Inch Brake Assembly with Self Adjust and Series Coils for Full Load DC Motor AMP of 24.5 Continuos Duty Call C/F
8MBTE-0100-AA-ED23 Mondel 8 Inch Thruster Brake, MON-8MBTE-0100-AA-ED23 ED23/5-A, 230/460/3/60 Hz., External Torque Spring, Auto Adjust., Max Torque 100 FT LBS 4/10 $5,236.00 C/F
8MST-0186-MA-ED23 Mondel Brake MST, 8-ED23
ED23/5C-A
Internal Torque Spring
230/460/3/60HZ
Maximum Torque 186 FT LB
With Manual Adjust
102035\03 11/9
$3,195.00 C/F
C190001 Mondel Cylinder, Slave Cylinder on a brake Call C/F
CDBR-4220B Mondel Braking Unit 220 kW, 460 Volt 17/12 $3,280.00 C/F
Disc Mondel Disc. 21 Inch Diameter x 0.75 Inch Wide Disc with a Finished Bore & Keyway $2,490.00 C/F
ED 23/5 Mondel Thruster. Thruster Brake Actuator # 320100, 460 Volt, 3PH, 60 Hz., No Spring (48LBS) 3/13 $1,898.00 C/F
ED 50/6C Mondel Thruster for a 16 Inch MBT Truster Brake 10/12 $4,744.00 1
ED 80/6 Mondel Thruster ED80-6-A. Thruster Brake Actuator. 230 / 460 Volt AC 60 Hz. C-10 Fluid, NBR Seals, 800 N 1/11 $4,976.00 C/F
ED121-6-A Mondel Thruster. Thruster Brake Actuator. 230 / 460 Volt AC 60 Hz. C-10 Fluid, NBR Seals, 1210 N 320106 /04 $5,097.00 C/F
ED30-5-C-A Mondel Thruster. Thruster Brake Actuator. 230 / 460 Volt AC., 60 Hz. Standard C-10 Fluid, NBR Seals, 300 N with Compression Spring for Hoist Applications $3,045.00 C/F
ED30/5-A Mondel Thruster. Thruster Brake Actuator. 460 Volt AC 60 Hz. Standard C-10 Fluid, NBR Seals, 300 N 320101 / 04 1/10 $2,814.00 C/F
EDB4004FT Mondel Resistor 460 Volt, 4 AMP., Class F, 4004FT\03 11/9 $396.25 C/F
EDB4027FT Mondel Resistor, 460 Volt, 27 AMP., Class F 4027FT\03 11/9 $1,287.50 C/F
EDB4034FH Mondel Resistor , 460 Volt, 34 AMP., Class F Resistor 4034FH\03 11/9 $3,026.25 C/F
MBC-4-230/460 Mondel Rectifier. MBC Brake Rectifier, Dual 5-13 Inch Mill Duty Brake, NEMA 4 Enclosure 2/13 $1,985.19 C/F
SDT2E-01140-Ed80A-21x75 Mondel Disc Brake. Heavy Duty AC Thruster Disc Brake
SDT2E-01140-Ed80A-21x75
Rated Torque 1440 LB FT
Rated Voltage 230/460/2/60Hz
External Torque Spring
Automatic Adjustment for Lining Wear
Manual Hand Release. Non Latching
Temperature Range -13 to 121 Degrees F
Stainless Steel Pins
$10,098.00 C/F
SDT2E-2150-Ed80A-28x.75 Mondel Disc Brake. Heavy Duty AC Thruster Disc Brake
SDT2E-02150-Ed80A-24x75
Rated Torque 2150 LB FT
Rated Voltage 230/460/2/60Hz
External Torque Spring
Automatic Adjustment for Lining Wear
Manual Hand Release. Non Latching
Temperature Range -13 to 121 Degrees F
Stainless Steel Pins
$10,098.00 C/F
10''BE Mondel Brake Shoes with linings for Mondel 10'' brake. Shoe type BE. One PAIR. $617.55 C/F
10''SA1 Mondel Brake Shoes with linings for Mondel 10'' brake. Shoe type SA1. One PAIR. $578.45 C/F
10F9060 Mondel Shaft $30.00 C/F
10F9105D2 Mondel Shaft $27.20 C/F
110063 Mondel Brake Shoe Assembly for a MBE / MBT MB 13 Inch Brake. Assembled Brake Shoe with Non -Asbestos, Bonded Lining Material. MSD sheet available 1/12 $538.00 C/F
111893 Mondel Bushing Assembly. BT-BE, 13'' $54.43 C/F
11CD300 Mondel 11CD300 DC clapper style brake assembly. Condition is used and rebuilt. $6,179.00 C/F
13'' MST-ED50 Mondel model 13'' MST electro-hydraulic thrust brake assembly. 460VAC, 3PH, 60 Hz, 435 ft-lbs torque, for a 13'' diameter brake wheel which is sold separately, assembly weight 188 lbs. Please advise motor HP and RPM at time of order. MAY BE USED FOR HOIST APPLICATION. $4,850.00 C/F
13MBE Mondel 13'' MBE Brake Assembly, 115VAC, no options or brake wheel. AISE rated brake. $3,555.00 C/F
140035 Mondel Armature on a 13SA1 Brake Assembly. Mondel recommends that the coil is mounted at the factory. Mondel will not be responsible for field installations. $319.00 C/F
140137 Mondel Link, BE, 13, MC, IT#16
$309.48 C/F
140138 Mondel Link, BE, 13, MC, IT#17-18 Link M/C $448.81 C/F
141051 Mondel Link, BE, 13, MC, IT#25 $309.48 C/F
141052 Mondel Link, BE, 13, MC, IT#26 $459.38 C/F
15E700 Mondel Shoe Holder $51.60 C/F
15F483 Mondel Shoe Holder $56.80 C/F
170296 Mondel Foot Pedal Assembly. Heavy Duty Unit for a Braketronic Brake System $2,000.00 C/F
18H8078D3 Mondel Spacer $22.80 C/F
18H8078D7 Mondel Spacer $21.20 C/F
20F314D10 Mondel Shoe Holder Pivot Bolt $0.80 C/F
20F314D4 Mondel Shoe Holder Bolt $2.00 C/F
20Q282D24 Mondel Slotted Hex Nut, 3/8-16UNC $0.80 C/F
20Z1273D131 Mondel Hex Head Capscrew 3/4-16 x 2 3/4 $2.00 C/F
210062 Mondel Cap Screw. Hard H Cap Screw, 1-14UNS X 2 1/4 Zinc Plated, Fully Threaded, NF $4.83 C/F
2169V005 Mondel Slotted Hex Nut 1/2-13 UNC $2.00 C/F
220211 Mondel Washer. Cam Lock, 1 Inch, 1.10 I.D. X 1.53 OD X 0.70 Thick $1.85 C/F
25Z932D3 Mondel Sealed Needle Bearing $31.60 C/F
25Z932D4 Mondel Sealed Needle Bearing $32.80 C/F
310007 Mondel Sealed Bearing, Now 11893 Bushing also requires 220211 Washer Cam Lock, 13 Inch SBE $63.87 C/F
8''MST Mondel Model 8'' MST AC Thruster Brake Assembly. 186 FT-LBS Torque, 230VAC, 3 Phase, 60 Hz. With an External Adjustment Torque Spring $ 420.00 An 8'' Diameter Brake Wheel is not included (88LBS) $3,922.00 C/F
8MBTJE Mondel Brake Shoe Assembly. 8 Inch Diameter. Qty. 1 2 per brake. $265.00 C/F
8MST-0186-MA-ed23/5c Mondel Brake 8MST-0186-MA-ed23/5c $3,345.00 C/F
ED 23/5-A Mondel Thruster. Thruster Brake Actuator Part # 32T100 -13 to 122 Degree F. 230 / 460, 3 Ph / 60 320100 / 04Hz., C-10 Fluid, NBR Seals Internal Torque Spring Not Included. No other options (48LBS) 8/9 $1,873.00 C/F
NR16SBE1000AS Mondel 16'' SBE Magnetic Brake Assembly $7,150.00 C/F
 
Prices are subject to change without notice. Last updated: 05/22/2013


Brake Products, Inc.

16751 Hilltop Park Place
Chagrin Falls, Ohio 44023
Phone: (440) 543-7962
Fax:     (440) 543-7963
Web:   www.brakeproducts.com
Email: sales@brakeproducts.com
Supplier of Industrial Brake Parts Since 1985