FESTOON TROLLEYS
 Parts slide together, lock automatically and the trolley is ready to roll. No fasteners to drop or lose. Removal or replacement is just as easy. Pre-engineered kits take the mystery out of festooning. Each kit includes everything you need. Just add cable or hose.
 

 
 
 
 
 
 
 
MODELS AVAILABLE
• INSTALL QUICKLY •

To install trolley - Place top section in position on wire rope. Slide sections together until they snap (lock) in place. NOTE: Sections may be assembled in only one way. Slide "un-blocked" end into "un-blocked" end. Do not force.
  
• REMOVE EASILY •

To remove - Insert straight bladed screwdriver into slot beside cable opening (not slit on side of trolley) and pry gently as shown above. Do not turn screwdriver. Slide Apart.
  

• NO FASTENERS REQUIRED •
 
 

#FRT-04

#FRT-05

#FRT-06

#FFT-08
For round cable or hose,
0.31" thru 0.59"
(7 - 15mm) OD.
 
Fits 0.25" (6mm) I.D. hose,
600v cable
#16/2-6, #14/2-4 or #12/2.		 For round cable or hose,
0.60" thru 0.94"
(15 - 24mm) OD.
 
Fits 0.38" - 0.50" (10 - 13mm) I.D. hose, 600v cable #16/7-12, #14/5-12,
#12/3-8, #10/2-6.		 For round cable or hose,
0.95" - 1.25" (24-32mm) OD.
 
Fits 0.75" (19mm) I.D. hose.
Special consideration should
be given large
cable/hose applications.		 For flat cable
to 2.1" x 0.66"
(54 x 17mm)
 
PVC jacketed cable
#16/4-12, #14/4-12, #12/4-8,
#10/4, #8/4, #6/4, and #4/4.
Gleason Reel reserves the right to ship the most current designs.

Brake Products, Inc.
16751 Hilltop Park Place
Chagrin Falls, Ohio 44023
Phone: (440) 543-7962
Fax:     (440) 543-7963
Web:   www.brakeproducts.com
Email: sales@brakeproducts.com
Supplier of Industrial Brake Parts Since 1985
Andrei Goryankin, Creative WWW Solutions, 16-Feb-00